Error Analyzing and Dealing in the Thermal Couple Temperature Measuring System

热电偶测温系统的误差分析与处理

Research on Auto-test Device Technology for Aero Short-model Thermal Couple

航空短型 热电偶自动检测装置技术研究

The probe of typical steels has specific features in measurement material thermal couple arrangement etc.

常用钢 热探头在尺寸、材料、 热电偶布置等方面不同于以往的评价方法中使用的 热探头。

Design of temperature testing meter based on data simulation of thermal couple

基于 热电偶 试验数据拟合的温度检测仪设计

Experiment had proved feasible that two different metal ceramic rods used as thermal couple electrodes were immersed directly into hot metal to measure temperature continuously .

采用两种不同组成的金属陶瓷棒作为 测温 热电偶，置于钢液中进行连续测温，实验证明是可行的。

Discussion on the Evaluation Method of Cheap Metal Armored Thermal Couple for Measurement Purpose

对工作用廉金属铠装 热电偶检定方法的探讨

DEVELOPMENT IN TECHNOLOGY OF CONTINUOUSLY MEASURING TEMPERATURE OF HOT METAL IN TUNDISH USING TUNG STEN-RHENIUM THERMAL COUPLE Application Research of Nonmetal Thermoelectric Couple in High Temperature Detection

中间包钢水连续测温技术及钨铼 热电偶主要相关技术的发展非金属热电偶在高温探测中的应用研究

Temperature module is mainly used to cast iron thermal analysis composition analyzing using thermal couple to collect the sample 's temperature cooling curve and according to the certain mathematical model calculate the elemental composition .

温度采集主要用于热分析法的铸铁成分分析，利用 热电偶采集试样冷却温度曲线，按照一定的数学模型计算各元素成分。

Uncertainty Evaluation for Temperature Rise Test of Electronics with Thermal Couple

电子产品 热电 耦法温升测试的不确定度评定

Discussion on Determining Temperature of Thermal Couple in Processing Rubber

橡胶加工中 热电偶测温探讨

An 87 channel signal simulator with various type static signals was designed . The signal types include large amplitude signals such as simulated noise and vibration signals small amplitude signals such as simulated temperature and thermal couple signals as well as resistance signal simulating strain parameter .

设计了一种87通道的多类型静态信号模拟器，信号类型包括模拟噪声、振动参量的大信号和模拟温度参量的 热点 偶小信号以及模拟应变参量的电阻性信号。

It introduces the technical requirement structure and metrological test method for short-model thermal couple which has stronger practicability in aero industrial technical research and production field .

介绍了短型 热电偶的检定装置的技术要求、结构及计量检测方法，在航空工业科研生产技术研究领域中具有较强的实用性。

A new method for direct measuring interface temperature and its distribution along diameter direction for friction welding joint between the same or different materials is put forward by using the standard thermal couple in combination with natural thermal couple .

将标准 热电偶与自然热电偶两种测温方法结合起来，提出了一种能直接测量同种及异种材料摩擦界面温度及其沿径向分布的新方法。

A thermal couple analysis method and a thermal vacuum test method for CZ-2C / SD during launching Iridium satellite are described in detail .

介绍了火箭发射卫星过程中星箭 热 耦合分析和热真空试验两种设计方法，具体介绍了综合应用计算和试验两种方法完成CZ-2C/SD火箭发射铱星任务的热环境和热控设计工作。

A measuring device for melting and crystallization parameters of slag has been developed using single thermal couple which not only is as a measuring temperature element but also as a heating element with the characteristics of higher speed of temperature going up and lowering and higher measuring efficiency .

研制了 热 丝法炉渣熔化和结晶参数测定仪，该测定仪用一根 双 铂铑 热电偶 丝既作加热元件又作测温元件，具有升、降温速度快，测量效率高的特点。

Thermal Conductivity Measurement of Materials by Cross Hot-wire Method : the Effect of Thermal Couple on the Measure The hot-wire method has been conducted with an installation construc-ted by ourselves .

交叉热线测量固体材料的热导率：测温 热电偶的影响自制了线热源法型壳导热系数测试装置，对几种制壳耐火材料及型壳 导热系数进行了测试。

Manufacturing and demarcating of the thermal couple group for thermal current measuring

热流测量传感器用 热电偶堆的制作与标定

First the satellite / vehicle thermal couple analysis by thermal network analysis method is introduced and every node temperature of the satellite distributor ( SD ) and the satellite is predicted .

首先，采用热网络分析法进行星/箭 热 耦合分析，对上面级及卫星各点温度进行预测。

This paper gives theoretical analysis of the measurement errors of four thermal couple method and establishes the mathematical model of errors .

这里对四 热电偶法的测量误差进行了理论上的分析，建立了误差的数学模型。

Development of a Measuring Device for Melting and Crystallization Parameters of Slag by Single Thermal Couple Method

热 丝法炉渣熔化和结晶过程测定装置的研制

Design of Cold End Self-motion Compensation of K Thermal Couple on the Basis of Single Chip

基于单片机的K型 热电偶冷端自动补偿设计（ 热电偶的）端的类型

The experiment had proved that the temperature measuring for molten steel with two different metal ceramic rods used as thermal couple immersed directly into molten steel is feasible .

实验证明将两种不同材质的金属陶瓷棒作为 测温 热电偶的两极，置于液态金属中连续测量金属温度，其原理和方法是可行的。

This monitoring device uses electric thermal couple as the head temperature sensor by finally actuating the LED displaying the measured results through cold-juncture compensation circuit RC filter circuit amplifier circuit and A / D convert .

发动机缸盖 温度监测仪采用 热电偶作为缸盖温度传感器，通过冷端补偿电路，RC滤波电路、放大器电路、A/D转换器，最后驱动LED显示器显示测量结果。

The design method of on-line shell temperature measuring system is introduced in this paper . It is emphasized to measure shell temperature with thermal couple and ADAM module here .

介绍了铝电解槽壳温度在线检测系统的设计方法，重点讲述了如何应用 热电偶和ADAM模块进行温度采集和传送。

Nonlinearity Estimation of Thermal Couple Model

热电偶模型的非线性估计

There is no finalized test device for standard short-model couple because that it 's difficult to realize the constant and uniform temperature field for test furnace of the thermal couple .

由于短型 热电偶检定炉的恒定均匀温场难以实现，所以，国内没有定型的标准短型热电偶检定装置。

The effect of thermal couple on the thermal conductivity measurement by cross hot-wire method was theoretically analyzed a practical correction formula for the temperature rise of wire was presented .

对交叉热线实验中测温 热电偶尺寸对材料热导率测量精度的影响做出了理论分析，推导出一个实用的热线温升修正关系式。

This paper introduces the development prospect of applying tungsten-rhenium thermal couple to continuous measurement of molten steel temperature .

本文介绍钨铼 热电偶用于钢水连续测温的开发前景；

Development in technology of continuously measuring temperature of hot metal in tundish using tung sten-rhenium thermal couple

钨铼 热电偶在连铸中间包钢水连续测温中的应用中间包钢水连续测温技术及钨铼 热电偶主要相关技术的发展

Now in common used temperature measurement methods have thermal couple infrared and temperature indicating paints etc. Thermal couple is able to disturb current and destroy test part . Infrared measurement has great infection owing to object emissivity environment and fixing etc factors .

目前常用的温度测试方法有 壁 温 热电偶、红外测试、示温漆等，热电偶会干扰流场破坏试验件，红外测试受物体发射率、环境、安装等因素影响较大。