Roll and cut the processing about the cylinder gear wheel of prime number and straight tooth and tooth counts greater than 100

齿数大于100的质数直 齿圆柱 齿轮滚切加工方法

Design of Paddy Steel Wheel Forming Least Tooth Holes

水田铁 轮形成最少 刺孔的设计

The gear grinding machine with conical wheel is retrofitted into CNC the CNC controlled method for tooth profile relief is researched and applied a comparison with traditional method is carried out .

在锥面 砂轮型磨齿机上进行数控改造，对 齿轮修形的CNC控制方法进行了研究和应用，并与传统的齿轮修形方法进行比较。

The Eccentric Dressing Device of Grinding Wheel with Duplex Circular Arcs PRofile And Analysis of Tooth Profile Errors Theory and Testing Research on Realizing Two-dimension Precision Adjustment with Double Eccentric Mechanism

双圆弧 砂轮偏心修整机构及 牙形误差的研究实现二维精密调整的双偏心机构理论及试验

For the effect of the grinding wheel feeding in hob radial direction the regrinding error between the practical tooth edge and the theoretical tooth edge is formed and the excessive regrinding error will lead to decrease the accuracy of gear .

受滚刀铲磨时 砂轮径向进刀的影响， 滚刀重磨后的刃 形与理论设计刃形之间存在着重磨误差，过大的重磨误差将会导致滚切的齿轮精度不合要求。

Affection of the processing method of mine anchor chain wheel tooth pattern on using performance

矿用锚链 轮齿 形加工方法对其使用性能的影响

Predictive Model for the Interference between the Grinding Wheel and the Tooth during Grinding of a Cylindrical Worm with Concave Tooth Surface

凹面齿圆柱蜗杆 磨 齿干涉的预报模型

The design of the twist gear wheel with three tooth used in Roots Rotors Blower based on Pro / E is introduced .

介绍了应用Pro/E软件，对罗 茨风机的扭叶形三叶 轮进行参数化设计。

Research on wheel tooth curve for domestic medium-power coal cutter

国产中等功率采煤机行走 轮齿廓曲线的探讨

The new tooth form of the sprocket wheel proposed in this paper is a large circular arc involute tooth form which is hobbed with linear edge hobbing cutters .

本文提出的 链轮新齿形，系用直线刃替代圆弧刃作为链轮滚刀的原始齿廓，从而获得大圆弧渐开线 齿形，简化刀具的设计与制造。

Our main products include Tianxing planetary cycloidal pin wheel reducer series drum motor series rigid tooth reducer series .

主要产品有：“天星”牌行星摆线针 轮减速机系列、电动滚筒系列，硬齿 面 渐开线减速机系列。

Numerical Control Spiral Awl Gear Wheel Grind Tooth Machine Pneumatic System Study and Design

数控螺旋锥 齿轮研 齿机气动系统研究与设计

Compared with the cycloid pin wheel gearbox the planetary gearbox with one tooth difference formed by cycloid equidistant line gears has advantages of high efficiency large loading capacity and simple structure etc.

应用摆线等距线齿轮组成的一 齿差行星减速器与摆线针 轮减速器相比，具有效率高、承载能力大和结构简单等优点。

In this paper the authors analyse theoretically the tooth profile and meshing character of cycloidal pin wheel planetary drive with double side support output mechanism and multi tooth number difference .

对具有双面支撑输出机构和多 齿差齿形的摆线针 轮行星传动的齿廓形状和啮合特性进行了理论分析。

By improving the wheel gear grinder of large plane grinding the tooth modification method was presented for manufacturing noninvolute beveloid gears .

通过采用特殊改 形后的大平面 砂轮磨齿机对渐开线变厚齿轮进行 轮齿修形来获得所需要的非渐开线变厚齿轮。

ZK worm is a kind of new-type worm which is a conical envelope worm and it can be grinded by conical wheel directly with simple grinding technology and high tooth profile accuracy so its machinability is good .

ZK蜗杆是一种新型蜗杆，它是由锥面 砂轮包络而成的，因而可以用锥面 砂轮直接进行磨削，磨削工艺比较简单，且可得到较高的 齿形精度，因而具有良好的可加工性。

The Analysis on the Reasons for Driving Chain Wheel Tooth Fracture of Riser at Gathering Coil Station

集卷站升降机构传动 链轮 轮齿断裂原因浅析

In the worm driving a series of temperature values of typical points in the vicinity of a worm wheel tooth surface were gained by means of thermocouple under the conditions of different torques .

使用热电偶，测量了蜗杆副在不同转矩条件下，邻近 蜗轮 齿面具有代表性的各点的温度数值；

Design of the aluminum alloy twist gear wheel with three tooth used in roots rotors blower based on parameterization

罗 茨风机铝合金扭叶形三叶 轮的参数化设计

In this paper the factors chosen were diameter and width of the wheel vertical load on the wheel and the length of the anti-sliding tooth then the regression equation was obtained to study the effects of all factors on sliding of the ground wheel .

选择地轮直径、地轮宽度、地 轮的垂直载荷、防滑 齿长度为试验因素，建立了滑移率的回归方程，研究各因素对地轮滑移率的影响。

Analysis on strength of the wheel tooth of cylindrical worm pair with circle - arc tooth

圆弧齿圆柱蜗杆副 轮齿强度分析

A Research for Effects of the Change of a Grinding Wheel Diameter on Tooth Profile of the ZK Worm Gear

砂轮直径变化对锥面包络圆柱蜗杆（ZK） 齿廓形状影响的研究

Because lock tongue acts on wheel tooth from horizontal direction in the utility model its force has little influence on horizontal rotary disc .

本实用新型由于锁舌从水平方向作用于 轮齿，其作用力对水平的回转盘影响较小。

The Color Wheel The helical plate tooth threshing cylinder the top thresh fan and the undershot fan are connected and driven by a vertical shaft .

该 机以一根 立轴联接螺旋板 齿脱粒滚筒、上排杂风扇和下轴流风扇，并驱动其旋转。

The Experimental Research of the Temperature in the Vicinity of Worm wheel Tooth Surface

邻近 蜗轮 齿面处温度的实验研究

When designing gear hob worm gear hob and shaping milling cutter it should be verified whether the interfere would occur between grinding wheel and the next gear tooth on condition of pledging the relief grinding length of the back of tooth .

在设计齿轮滚刀、蜗轮滚刀和成形铣刀时，要校验在保证齿背铲磨长度的情况下，所用 砂轮是否和下一个 齿发生干涉。

The paper sets up a mathematical model of the bulk temperature of worm wheel tooth and after simulating the steady temperature field with FEA obtains the characteristics of temperature distribution of tooth .

建立 蜗轮 轮齿本体温度的数学模型，运用有限元方法对蜗轮稳态温度场进行分析，获得了轮齿的温度分布规律。

It is put forward that experience formula to determine hardness relation between big wheel and little wheel of gear pair hardened tooth flank .

据此提出确定 硬齿面齿轮副的大小 齿轮之间硬度关系的经验公式。

Method about determining mating tooth number of harmonic chain-drive and load on wheel tooth

谐波链传动的啮合齿数及 轮齿上载荷的确定方法