Working of the thin cylinder part

薄壁 圆筒零件的加工

With the double layered structure and the thin wall cylinder energy absorbing system the explosion wave and high speed fragments were successfully sustained within the container .

在采用了多层容器结构和 薄壁 钢管能量吸收装置等措施后，容器安全地承受了爆炸装置形成的弹片和冲击波的破坏作用。

Based upon displacement and stress analysis on the thin cylinder under axial symmetrical load and taking actual engineering calculation as example the upper beam computational method of elastic foundation is applied in internal force calculation with such structures .

通过对轴对称载荷作用下 薄壁 圆筒位移、应力分析，以具体工程计算为例，将弹性地基上梁的计算方法推广应用于此类结构的内力计算过程中，其计算方法快捷、准确。

Testing pressure factor based on Reliability Analysis on internal pressure thin wall cylinder

基于可靠度分析的外压 薄壁 圆筒试验压力系数

A Reinforced Measuring Method for Thin Wall Cylinder of ICE

内燃机 薄壁 气缸 套的加固测量法

This paper introduced an experimental research on welding residual stresses of thin wall cylinder .

介绍了 薄壁 筒焊缝残余应力的实验研究。

The difference between ideal diffraction pattern and that of actual measurement is considered and the actual diffraction pattern is studied on four aspects such as white noise characteristic of Gauss beam of LD spatial position and disturbance of thin cylinder and focal spot .

针对 细圆柱体理想衍射花样和实测衍射花样的差异，从白噪声、光源的高斯特性、 细 圆柱体空间位置及外界扰动和焦点光斑等四个方面研究了实测衍射花样。

The article calculates the perfectly conducting thin cylinder RCS in incidence of TM plane wave by using the two different basis MOM .

利用子域基和物理模式基两种不同基函数下的矩量法对平面波照射下的理想 细导电 圆柱的单站RCS进行了计算和分析。

The theoretical and experimental research on critical pressure in buckling of short thin cylinder under external pressure

外压 薄壁短 圆筒临界失稳压力理论及试验研究

The current situation and particular difficulty to a kind of positioner for welding the longitudinal beam of large diameter and thin wall cylinder is discussed . a special design of welding positioner especially suitable for the batch production is introduced in the paper .

论述了大直径 薄壁 容器简节纵缝焊接的特殊困难及生产现状，介绍了一种适用于批量生产的专用焊接操作机。

Research on seam welding principle and technology for minitype thin shell cylinder welding assemblies

小型 薄壁 缸 筒焊接组合的缝焊原理和工艺分析

Considering the particularity of processing diffraction pattern of thin cylinder the Chebyshev ⅱ filter is taken as the filter of zero-phase filtering algorithm based on analysis of usual filtering algorithm .

根据 细 圆柱体衍射花样处理的特殊性，在分析常用滤波算法的基础上，确定并设计了用于零相位滤波算法的切比雪夫Ⅱ型滤波器。

The Application of Thin Cylinder in the Drawing Core Mechanism of Injection Moulds

薄型 油压 缸在注射模具抽芯机构中的应用

Fit of Arc for List Curve for Thin Wall Cylinder Sleeve

薄壁 缸套列表曲线的圆弧拟合

The utility model has simple structure and is capable of being made only through that a standard thin air cylinder is reformed .

本实用新型结构简单，仅需将标准 薄型 气缸进行改造即可制成。

Test Analysis on Vibration Signal of Thin Aluminium-alloy Cylinder Machined with Orthogonal Turn-Milling

正交车铣铝合金 薄壁 回转 体振动信号的试验分析

This paper makes simple force and its deformation analyses for the thin walled cylinder under axial compression at first .

本文首先对轴压 薄壁 圆筒作出简单的力及其变形分析。

Application of Zero Clearances Clamp on Honing Thin Wall Cylinder Sleeve

“无间隙”夹具在珩磨 薄壁 缸套上的应用

Uncertainty of thin cylinder diameter measured by means of optical diffraction

光学衍射法 细 圆柱体直径测量的不确定度

A kind of integrated strain gauge is presented which is fit for the thin shell cylinder type of sensing element to compose the miniature six axis force sensor .

针对 薄壁 圆筒 形 弹性 体本文提出了一种集成式的电阻应变计，阐述了它与 弹性 体组成微型六维力/力矩传感器敏感部件的方法，及其设计和制作过程。

Internal force calculation of thin cylinder under axial symmetrical load

轴对称载荷作用下 薄壁 圆筒的内力计算

In this paper the advantages and possible problems of the thin cylinder drawing core mechanism of injection moulds are discussed .

论述了注射模具中 薄型 油压 缸侧抽芯机构的特点以及可能发生的问题。

In this paper a set of tension formulas for composite winding outside thin wall cylinder are established according to theory of cylinder shell .

本文按圆柱壳理论建立了一套在 薄壁 圆筒外缠绕复合材料的张力公式。

The Optimum Design of Thin Walled Cylinder against External Pressure

外压 薄壁 圆筒壁厚的优化设计

Experiment result shows that the measurement of thin cylinder diameter can achieve higher measurement accuracy by vector model . Secondly the measurement system of thin cylinder diameter by laser diffraction is developed .

实验结果表明使用矢量模型测量 细 圆柱体直径可以获得更高的测量精度。其次，研制了一套基于激光衍射的细圆柱体直径测量系统。

Research on the manufacturing technology of a thin shell cylinder

新型 薄壁 筒加工工艺技术的研究

A design of positioner for welding longitudinal beam of large diameter and thin wall cylinder

大直径 薄壁 容器 筒节纵缝专用焊接操作机的研制

Research on Small Deflection of Thin Cylinder Shell with Initial Stress

初应力 圆柱壳小变形问题的研究

The Study of Spinning Precision Control for Thin Wall Cylinder with Large Length-diameter Ratio

大长径比 薄壁 圆筒旋压精度控制工艺研究

The defects and their solving methods in roll pressing the FRP thin wall cylinder

FRP 薄壁 圆筒卷压成型时存在的问题及其解决方法