We have already studied the effect of magnetic field wire space the size of readout pad and the distance between the pad plane and the wire plane on the performance of TPC . At the same time some important results are given for designing TPC .

研究了磁场、读出电极 几何 尺寸、灵敏 丝距以及读出电极平面与灵敏丝平面之间的距离等参数对TPC性能的影响，给出了TPC的一些最佳设计参数。

After the arc has been buried the arc column gas atmosphere is changed and the concentrated arc on the wire tip becomes a covered one which makes the droplets size smaller and the droplet transfer form change .

潜弧后弧柱气氛改变， 焊丝端部的弧根由集中形态扩展为覆盖整个端部形态，使得熔滴 尺寸变得细小，熔滴过渡形式发生变化。

Analysis on Agricultural Submerged Electric Wire and Determination on Technology Control Requirement of Its Shape Size

浅析农用直埋 电线及其外形 尺寸工艺控制要求的确定

The experimental results show that the molten droplet size presents normal distribution between 1 and 2 times of wire electrode diameter . The excessive large or small size in molten droplet are all unfavorable to the stability of welding process in short-circuit transfer mode .

结果表明，熔滴尺寸呈分散性较大的正态分布（1~2倍 焊丝直径），过大或过小的熔滴 尺寸均不利于短路过渡焊接过程的稳定性。

The repair instructions document main wire harness is divided into several chapters because of its size .

修理说明文档“ 主线束”非常 大，因此被分成了多个章节。

The telescopic multi-stage telescopic boom driven by fuel tank and steel wire rope synchronization system with a small size light weight advantages especially suitable for operation in narrow space .

油缸 钢丝绳同步伸缩系统驱动的多级箱型伸缩臂具有 尺寸小、重量轻的优点，特别适宜于狭小空间内作业。

This paper analyzes design targets and parameters of pad pad hole PC wire shape size and arrangement in automatic wavecrest soldering of PCB in detail .

本文对波峰自动焊接中印制板的焊盘、焊盘孔、印制 导线及其形状、 尺寸以及分布等设计指标和参数作了较详细的分析。

Ground anchor piles that fix workover derrick wire whose installation location installation size and ultimate capacity of pulling on workover rig has very important effects .

固定修井机井架绷 绳的地锚桩，其安装位置及安装 数量对修井机井架承载能力都有十分重要的影响。

During the rolling process of Φ 15.4mm bearing steel rod and wire the simulation results of temperature and grain size are in good agreement with measured ones and the simulation values of mill speed quite agree with technological parameters .

Φ15.4mm轴承钢棒 线材轧制过程中，温度和晶粒 尺寸的模拟结果与实验结果吻合较好，轧制速度的模拟值与工艺设定值吻合较好，验证了模拟的准确性。

The austenite deformation-recrystallization process during high-speed rolling of the high carbon steel wire have been simulated and calculated and the austenite grain size of the rolling stock and the law of its variation pass-by-pass calculated by application of the physical metallurgy theory and experimental model .

结合高碳钢 线材的生产实际，利用物理冶金理论和实验模型，对奥氏体的变形-再结晶过程进行模拟计算，计算出各道次的奥氏体晶粒 尺寸并分析变化规律。

Adding metal wire can increase the current path to reduce the size of the antenna .

添加金属 线可以增加天线电流的流经路径，减小天线 尺寸。

Vibrating wire sensors with characteristics of high precision and small size have been widely used in monitoring for dam safety .

振 弦 式传感器具有精度高， 体积小等优点，广泛用于大坝安全监测。

Cat 's whiskers are very hard like the wire the energy of the hole size .

猫的胡子非常硬，像 钢针一样，能量出洞口的 尺寸。

To introduce the matters needing attention in the test for binding force of bead wire with rubber which are shown from designing of die thinning of size cutting of steel wire specimen size packing in die and taking steel wire out etc

介绍在胎圈钢丝与橡胶粘合力试验中应注意的事项，从模具设计、胶料的薄通、 钢丝样品的截取、 胶料的装模操作及钢丝的抽出等几个方面进行了说明

High carbon steel wire has strict requirements on molten steel cleanliness size distribution and shape of inclusions in which metallic inclusions in steel is one of important factors .

高碳硬 线 盘钢制品对钢的纯净度，夹杂物的 尺寸、分布以及形态都有严格的要求，其中非金属夹杂物是影响高碳 硬 线钢质量的重要因素之一。

Based on the analysis of the impact of foil electrode and wire electrode on the machining gap size and flow field distribution in precision electrochemical machining ( ECM ) of narrow groove wire electrode with small diameter is adopted to improve the machining accuracy and process stability .

通过在理论上分析窄缝电解加工中片状电极和 丝状电极对加工 间隙和流场分布的影响，提出了采用小直径丝状电极提高加工精度和改善加工稳定性的方法。

The 0.3 ( kg / t ) aluminum wire was feeding after sulphur wire feeding to fine the grain size of steel .

喂硫 线后，再喂入0.3kg/t的铝线，细化钢的 晶粒。

The diameter of the wire is smaller the average size is smaller ;

粉末 粒度 随 金属 丝直径减小而变小；

In the process of high speed wire-rod milling micro-tension and automatic loop control are usually used to assure the precision of wire sectional size and to increase the productivity and the wire quality .

在高速线材生产中，大都采用微张力和自动活套控制，以保证轧 材断面 尺寸精度，提高生产效率和产品质量。

It researched the computer aided comprehensive design method of three-phase induction motor such as how to decide the guage of wire how to decide the size of slots and more importantly how to adjust the scheme automatically .

对三相感应电动机的计算机辅助综合设计进行了研究，探讨了自动选取 线规和和自动确定槽形 尺寸的问题，重点研究了设计方案的自动调整方法。

The paper machine also equiped with a hydraulic head box and a single forming wire and a slope two-roll size press device in the drying part .

该纸机同时配有水力式流浆箱、单长 网，在干燥部设置一台 斜列双辊式表面施胶机。

As the product of the intersecting of the fractal geometry and antenna technology fractal-shaped wire antennas can increase the working band and reduce the size .

作为分形几何和天线技术交叉的产物，分形 天线振子能够增加天线的工作频带、减小天线 尺寸。

By combining the near-field preconditioning technique with hybrid physical optics-method of moments ( PO-MoM ) a novel technique is proposed for analyzing the radiation problems of wire antennas mounted on complex platforms with electrically large size .

提出了一种将近场预条件技术与物理光学矩量法（POMoM）相结合的新技术，并应用于分析电大 尺寸复杂载体 上线天线的辐射问题。

The results indicated that the tensile strength was reduced slowly after holding 500h 800h and 1000h at 120 ℃ and 150 ℃ respectively but its tensile strength was still higher than that of wire with the same size .

结果表明：GFRP棒材在120℃、150℃下分别保温500h、800h和1000h后，其抗拉强度虽有所下降，但仍高于或接近于同 规格 钢丝的抗拉强度；

The elastic modulus of the surface layer does not change with a decreasing nanowire size whereas the elastic modules of core layer decrease with a decreasing wire size leading to the fact that the overall elastic modulus of nanowires decreases as the diameter decreases .

结果表明，金属纳米 线的弹性模量具有尺度 效应，随着 直径减小，整体弹性模量减小，主要是因为核心层弹性模量减小，表面层弹性模量变化不大。

Wire the list size node to the totext node .

将list size节点 连接到totext节点。

Numerical Control Wire Cutting Processing Technology for Die & Mould with Overrange Size

超行程 模具的数控 线切割加工工艺