After a lot of experiments ideal technical parameters for preparing hydroxyapatite powder were obtained by which finely crystalline hydroxyapatite powder could be prepared .

通过实验，得到了理想的羟基磷灰石 粉 体制备 工艺参数，由此可得到结晶性较好的羟基磷灰石粉体。

It was shown that the major technical specifications of home-made texture powder coating have reached or surpassed that of some similar imported samples .

国产化美术 粉末涂层和进口样机涂层的理化 性能测试对比结果表明，国产化美术 粉末涂层的物理化学性能主要指标已达到或超过进口样机的涂层。

A new method to determine optimal operating technical parameters in Nano-Fe_3O_4 powder by hydrothermal method

一种确定水热法制备 纳米Fe3O4最佳 工艺参数的新方法

Development manufacture raw material performances and technical index of putty powder for exterior wall are introduced .

介绍了外墙用腻子 粉的研制、生产、原材料性能及 各项指标。

Study on the Manufacture Technology and Technical Theory of Bronze Powder

铜金 粉制造技术及 工艺理论研究

Technical summary on powder coating of large - diameter steel plate - welded pipe for utility water system

关于自来水用大直径钢板焊接钢管 涂塑 技术总结

The paper introduces the preparation process and the technical performance of the putty powder for exterior use and analyzes the influence of CMC and polypropylene fiber on the performance of the putty .

介绍了建筑外墙腻子 粉的制备过程和 技术性能，分析了羧甲基纤维素和聚丙烯纤维等对腻子性能的影响。

Technical Summarization of phosphor Ore Powder Milling System

磷矿 粉磨系统 技改总结

The dissertation describes the technical requirement of laying powder device and brings forward the idea of structural design .

给出 铺 粉装置的设计要求；

As example with 2.5 % Lambda-cyhalothrin EW the compositions of the formula were experimentally determined as follows : Lambda-cyhalothrin Technical Powder 2.5 % ;

本文主要以2.5%高效氯氟氰菊酯水乳剂为例研究了其配方所需各组分组成情况，形成了相应水乳剂配方为：高效氯氟氰 菊酯原 粉2.5%；

The material chemical composition and manufacture technical process of powder metal forged connecting rods are introduced .

介绍了 粉末冶金热锻连杆的材料成分和制造 工艺。

Technical Measures to Raise the Powder Reduction Efficiency of the Cement Mill

提高水泥管磨机 粉磨效率的 技术措施

Study on the optimum technical parameters of plasma arc powder surfacing technology

等离子弧 粉末堆焊最佳 工艺参数的研究

In this paper the technical processes of automatic molding for powder metallurgy complicated parts with multi step have been introduced .

介绍了 粉末冶金多台阶复杂结构件自动成形的 工艺过程；

The technical specifications of golden all-polyester powder coatings and films were listed .

列举了金 相纯聚酯 粉末涂料及涂层的性能指标。

Technical requirements of manganese carbonate ore powder Carburization of Sponge Ferromanganese for Manganese Oxide Fines Containing Coal by Microwave Heating

GB/T3714-1983碳酸锰矿粉 技术条件微波加热含碳氧化锰矿 粉 体还原过程中锰铁金属化物的渗碳行为

Current situations and technical progresses for preparation vanadium dioxide powder

二氧化钒 粉末制备 工艺研究的现状和发展趋势

The paper discussed narrated the technical process of active soybean curd powder which produced in the vacuum concentration process .

该文讨论真空浓缩法生产方便豆腐 粉 工艺过程。

Technical requirements of manganese carbonate ore powder

GB/T3714-1983碳酸锰 矿粉 技术条件

Technical development of powder metallurgy in New Millenium

新千年 粉末冶金 技术的发展

The research concerns in the preparation process and technical parameter of U_3O_8 powder as well as physical and chemical performance of prepared U_3O_8 powder . The effect of addition of U_3O_8 powder on the quality of UO_2 pellets was analyzed .

本工作研究U3O8 粉末制备工艺流程和 工艺参数，测试制备出的U3O8 粉末的物化性能以及U3O8粉末添加对UO2芯块产品质量的影响。

By analyzing the technical principle of SCHENCK powder feeder and explaining its adjustment method it probes into its priority in the field of petrochemical industry powder feeding .

剖析SCHENCK 粉末加料器的 技术原理，说明其调校方法，探讨其在化工工业粉末计量加料中的优越性。

The technical Process of porous PA powder with absorption capacity made of PA scrap through dissolution recrystallization seperation and drying and the application is introduced .

叙述了用聚酰胺废料经溶解、重结晶、分离干燥制得具有吸附性能的多孔性聚酰胺 粉末 的 工艺过程及应用。

The preparation and activation methods of machine milling ( MM for short ) for Ni / Al and Ti / Al system tiny powder are researched . The technical treatment of MM makes metal powder a lot of changes in mechanical properties chemical properties and organization structure .

研究了Ti／Al，Ni／Al系金属微粉的MM制备与活化方法，分析了MM处理 工艺使金属 粉末在物理性能、化学性能和组织结构等方面的变化。

Method : Applying the method of digital-photo computer and stander color sample of TheInternational Print Association of suggesting Pantone Hexachrom measures technical porcelain stain powder .

方法：采用数码摄影和计算机技术对 技工修饰瓷比 色板的色度分布范围进行测量分析。

Surface morphology and technical performances of warm compaction powder made by various methods

不同方法制备的温压 粉末形貌及 工艺性能

Technical support : Powder granulation technologies design and manufacture of spray equipment .

技术支持：热喷 涂粉造粒与分级；喷涂自动化设备设计与制造。