Using paracetamol as template molecule molecularly imprinted polymer membranes with supporting membrane were synthesized through in situ polymerization by UV irradiation .

摘要采用紫外光引发原位 聚合的方法制备了具有支撑膜的扑热 息痛分子印迹聚合物膜。

In addition carbon nitride nanotubes ( CNNTs ) have been synthesized with porous anodic aluminum oxide ( AAO ) membrane as template by the thermal polymerization of sol-gel precursors ( 600 ℃) .

此外，以多孔氧化铝（AAO）作 模板，结合溶胶-凝胶高温 聚合（600℃）制备了石墨型氮化碳纳米管。

It was found that the hydrogen bonded complexes of monomer template and oligo functional monomers before polymerization is the control factor governing the formation of microsphere .

研究了 合成 反应 条件对聚合物 形貌的影响，发现 聚合前主客体氢键络合物和功能单体氢键低聚体是控制微球形成及其粒径大小的关键因素。

Synthesis of polyaniline nano-arrays on anodic aluminum oxide template by the diffused polymerization

阳极氧化铝 模板上扩散 聚合法制备聚苯胺纳米管（线）阵列

The MIPs has been successfully applied to the determination of naringenin in the Chinese traditional medicine with good results . ( 3 ) Molecular imprinted polymers were prepared using 4-chlorophenoxyacetic acid ( 4-CPA ) as template molecules by thermal-initiated bulk polymerization method .

对传统中药中的柚皮素成分进行了检测，结果令人满意。（3）以对氯苯氧乙酸为 模板分子，采用热引发本体 聚合法合成了分子印迹聚合物。

The colloidal crystal template was prepared by the centrifugal settling of microspheres whose particle diameters were about 280 nm from the mother liquor of polymethyl methacrylate ( PMMA ) obtained by emulsion polymerization .

通过乳液 聚合获得粒径为280nm左右的聚甲基丙烯酸甲酯（PMMA）微球，从其母液中离心沉降制得胶晶 模板。

The Optimum Study of Selective Separation of Copper by Molecular Template Polymerization

选择性分离铜的分子 模板 聚合 法优选条件的研究

This is the first report of the template polymerization of CQ .

这是首次报道邻苯二酚的 模板 聚合。

This is first report of the template oxidative polymerization of HQ .

这是首次报道对苯二酚在酸性条件下的氧化 聚合 反应，也 首次实现了对苯二酚的 模板 聚合。

The results indicate that the template polymerization of hydroquinone processes following the Pick up mechanism .

该结果表明对苯二酚的 模板 聚合主要是遵循选取机理。

The results are summarized as follows : The CdS / CMK-3 composites were successfully synthesized with SBA-15 as the template by in situ liquid impregnation method that introduced cadmium chloride into precursor solution using ammonium persulfate as both the polymerization initiator and the sulfur source .

结果如下：1.以SBA-15为 模板，采用液相浸渍的方法将氯化镉引入复合材料的前驱体溶液中，过硫酸铵既做 聚合引发剂又提供硫源，原位制备出CdS/CMK-3复合物。

The molecularly imprinted microspheres using 4 aminopyridine as template were prepared with precipitation polymerization .

利用分子印迹技术，通过沉淀 聚合方法合成了对4-氨基吡啶具有选择性结合能力的微球形分子 模板聚合物。

A review with 37 references describes functions of poly ( vinylpyridine ) resins modification of poly ( vinylpyridine ) resins through quaterisation complexing oxidation and template polymerization etc and their various application .

论述了聚乙烯吡啶树脂的性能和通过季铵化、络合、氧化、 模板 聚合等树脂修饰引起的性能改变及应用扩展。

This review described the preparation of biomimetic polymers by molecular or ionic template polymerization and modification of polymers utilization of these polymers in separation and biomedical meterials .

本文评述了 仿生 聚合物的制备及其对分子的 识别 作用和在分离和生物医用材料方面的应用。

Preparation of Nano-sized Block Copolymer Membrane and Its Application to the Template of Electrochemical Polymerization

纳米结构膜的制备及其在 导电聚合物电化学 聚合中的应用

In the recent twenty years PEC were studied broadly due to their special properties and applied in many fields such as environment new coatings materials template polymerization protein separation drug delivery and molecule self-assembly .

由于其具有很多优异性，近二十年来得到了广泛的研究，并在环保、新型膜材料、 模板 聚合、蛋白质分离、药物载体及分子自组装等领域得到了广泛的应用。

The proper in-situ polymerization systems of acidic and basic compounds using amino acid derivatives and cinchona alkaloids as template molecules respectively were adopted for preparation of molecularly imprinted monolithic columns by systematically investigating the effect of polymerization conditions on pore structure and selectivity of resulting polymers .

本文分别以氨基酸衍生物和辛可纳生物碱为 模板分子，系统研究了制备条件对 聚合物孔结构和选择性的影响，建立了合适的酸性化合物和碱性化合物的原位印迹体系。