A three-dimensional mathematical model of the resin transfer molding ( RTM ) filling process for the automobile bumper was presented .

首先建立了汽车保险杠树脂 传递 模塑充模过程的三维数学模型；

Transfer molding is widely applied in semiconductor packaging technology by itssuperior in mass production and reliability .

树脂 传递 模封装是广泛使用的可靠性量产性均好的半导体封装方法。

Study on the Compound Effect and Performance Evaluation Method of Resin Transfer Molding Product

RTM 工艺制品复合效应与使用性能评价方法研究

The Analysis and Research of Transfer Molding Technology in Micro-electronics Plastics Packages

微电子塑封 传递 模塑 成型技术的分析与研究

Numerical analysis on microscopic flow behavior of resin with resin transfer molding ( RTM ) process

树脂 传递 模塑（RTM）工艺树脂微观流动行为数值分析

Progress in numerical simulation and mathematical formulations of resin transfer molding processes

树脂 传递 模塑过程的数学描述和数值模拟进展

Numerical simulation of resin transfer molding is important to mold design process control and parameter optimization . This paper introduces the RTM process and its characterizations briefly .

RTM工艺过程数值模拟对模具设计、工艺过程控制及参数优化非常重要。

Characterization and Analysis of Interfacial Property of the Resin / carbon Fiber in the Resin Transfer Molding Process

RTM 成型过程中树脂/纤维界面性能表征及分析

Methods to measure permeability of fabric reinforcement in resin transfer molding are reviewed . The influences of capillary pressure flow rate and test fluids towards the measurement of permeability are discussed .

对树脂 传递 模塑 工艺中纤维增强材料的渗透率测量方法进行了综述和评价，讨论了毛细压力、流动速度和试验流体等因素对渗透率测量结果的影响。

In the practice the controller has been successfully tested for the co - injection resin transfer molding process to reduce transverse resin mixing and to ensure complete wet - out .

在树脂联合注射 传递 模塑工艺实例中该控制体系有效地减少了树脂的混合，确保了纤维完全浸透。

Numerical simulation of resin transfer molding ( RTM ) processes are important for process parameters optimization mold design and quality control of parts .

树脂传递模塑（ Resin Transfer Molding， RTM）过程的数值模拟对于优化工艺参数和模具设计、控制制品质量等具有重要意义。

Study on Preparation and Characterization of Heat-resistant Benzoxazine Resin for Resin Transfer Molding

适用于 RTM 成型 工艺的耐热苯并恶嗪树脂的制备与性能研究

Lowest flow rate of this series of resins for extrusion and transfer molding .

最低这种挤出 成型树脂系列和 传输流量。

This paper introduces the processes and characterizations of the resin transfer molding briefly .

新型树脂 传递 模塑 技术介绍了树脂 传递模塑 工艺过程及特点。

Permeability Measurement in Resin Transfer Molding

树脂 传递 模塑 工艺中渗透率的测定

In this paper the processing property of M-3193 unsaturated polyester resin for Resin Transfer Molding is studied systematically .

对树脂 传递 模塑用M-3193不饱和聚酯进行了系统的研究，分析了温度、边缘效应以及SiC纳米粉填料对树脂 流动性和 材料 力学性能的影响。

The characteristics of RTM ( Resin Transfer Molding ) process are introduced the mold filling flow the gists of process controlling and the method of mold design of RTM to produce high accuracy plane radome are briefly described .

介绍了RTM（树脂 传递 模塑）工艺的特点，并对RTM法制造高精度飞机雷达罩的充模流动、工艺控制要点和模具设计方法等作了简要的论述。

The mold filling process and numerical analysis in resin transfer molding

RTM充 模过程及数值分析

Research on Quartz Fabric Reinforced Polyimide Composites by Resin Transfer Molding

RTM 成型石英布增强聚酰亚胺复合材料研究

The Resin Transfer Molding ( RTM ) is becoming an efficient production method for advanced fibre composite parts .

树脂 传递 模塑（RTM）工艺越来越成为一种高效的先进纤维增强复合材料的制造方法，其中RTM的充模过程是一个很重要的步骤。

Resin Transfer Molding ( RTM ) a novel shaping process with many special advantages for polymer matrix composites has developed very rapidly in recent years .

树脂 传递 模塑是一种新型的树脂基复合材料成型方法，具有许多独特的优点，近年来发展迅速。

Study on gate / vent arrangement in resin transfer molding process

RTM 工艺 中 注射口和排气口的研究

This paper studies the optimum arrangement of gate and vent locations for RTM process design using a mesh distance-based approach and the trigram method to find optimal auxiliary injection gate locations for successful mold filling and the analysis with controlled multiple gate resin injection in resin transfer molding process .

本文讨论了用网格间距法设计最佳注射口和排气口位置，寻找RTM工艺充模过程中的最佳辅助注射口的三线形法以及对多注射口的 RTM工艺进行了分析。

Numerical simulation of mold filling stage in resin transfer molding processes based on VOF / PLIC method

基于 VOF/PLIC界面追踪方法的 RTM工艺充 模过程数值模拟

According to the new development of the RTM technique the study of this paper includes two parts one is the defects formation mechanism and effect factors the other is the control method in resin transfer molding .

本论文依据 RTM技术的最新进展，从预成型体 设计 和 充 模 过程控制两个方面研究了气泡、干斑和结构变形三种缺陷的形成机理和消除方法。

Resin transfer molding ( RTM ) is one of the important processes for fabrication of fiber-reinforced polymer-matrix composites .

树脂 传递 模塑 工艺（RTM）是纤维增强聚合物基复合材料的重要制备工艺之一。

Research on computer aided resin transfer molding process planning system

计算机辅助树脂 传递 模塑 成型工艺系统研究

Resin Transfer Molding ( RTM ) is the fast developing process for manufacturing fiber reinforced composite recently .

树脂传递模塑工艺（ Resin Transfer Molding， RTM）是近年来纤维增强树脂基复合材料制 备工艺中发展较快的工艺。

Mesoscopic simulation of resin transfer molding processes based on the coupling analysis between surface tension and fluid pressure

基于表面张力和流体压力耦合分析的树脂 传递 模塑过程的细观模拟

A mathematical model of resin flow and temperature variation in the filling stage of the resin transfer molding ( RTM ) is developed based on the control volume / finite element method ( CV / FEM ) .

用控制体/有限元方法建立了树脂 传递 成型工艺过程中树脂流动和温度变化的数学模型。