Thermal Characteristic Simulation of Dual-wavelength Laser Diode Cascaded by Tunnel Junction

隧道 带 间级联双波长半导体激光器 热特性模拟

Thermal stability of simultaneously formed tin_xo_y / tisi_2 for shallow junction device applications

同时形成用于浅 结器件的TiNxOy/TiSi2的 热稳定性

Electric Field Effect on the Thermal Emission Rate of Holes Trapped at Gold Donor Center in Si P-N Junction

硅 P-N 结电场对金施主中心空穴 热发射率的影响

Research on the thermal degradation mechanism of ag / inp Schottky junction

Ag／InPSchottky 结 热退化机理的研究

Studies on the Thermal Damage Mechanisms of a PIN Junction Optoelectronic Diode by Laser

激光对PIN 结光电二极管 热破坏机理的研究

Effect of Thermal Fluctuation in Josephson Junction

约瑟夫逊 结 中 热涨落效应的研究

Velocity and temperature fluctuations of the mixing of hot and cold fluids are the essence to induce thermal fatigue of the tee junction .

冷热流体混合过程产生的速度和温度波动是诱发T型 管道 热疲劳的本质原因。

So a pulse power burn-in method has been proposed which measure junction temperature by thermal parameters and control junction temperature by adjusting the power frequency and duty of pulse to ensure the junction temperature meet the requirement of burn-in .

因此，参考GJB128A-97标准，提出了一种脉冲功率老炼的方法。采用 热敏参数法来测量结温，同时调整脉冲的功率、频率和占空比来控制 结温，使结温达到老炼要求。

Research of thyristor 's transient thermal impedance and junction temperature rise

晶闸管的瞬态 热阻抗及其 结温温升的研究

Thermal circuit model of a hybrid integrated power electronic module ( IPEM ) is analy - zed in this paper and then the numerical simulation result of Rth-jc ( the thermal resistance from junction to case ) is obtained .

分析了混合封装的电力电子集成模块的热路模型，并且仿真得出了结壳 热阻 Rth-jc的s数值仿真结果。

A Thermal Model for Electrical Measurement of the Peak Junction Temperature of Power Transistors

功率晶体管峰值 结温电学测量技术中的 热模型一个电学实验的改进

Transition layer applied easing the composition difference and reduce the thermal stress concentration when thermal shock delayed the growing of cracks in the junction of bonding layer and ceramic layer .

过渡层的应用缓和了涂层中的界面成分的突变，降低了涂层在 热震过程中界面 处产生的热应力集中，延缓了界面 处贯穿裂纹的产生。

Transistor thermal spectrum as a new method different from the commonly infrared thermogram is introduced to characterize the non-uniform property of the junction temperature distribution .

晶体管 热谱是表示晶体管 结温不均匀性的一种与热像图不同的新方法。

Light and thermal stabilities of graded P-I hetero junction in a-si : h solar cell

非晶硅太阳电池中缓变P-I异质 结的光、 热稳定性的研究

In this paper the improving method for the native thermocouple gauge tubes is given to reduce the thermal inertia of the cold junction to the same degree as the hot junction .

本文提出的改进方法能将国产规管冷 端 的 热惯性降低到与热端接点相当的程度。

Thermal characterization of high - power laser diode cascaded by tunnel junction

隧道级 联大功率半导体激光器 热特性分析

If the valve body material can be welded but very different thermal expansion coefficient or changes in operating temperature range of a larger thread junction closure weld must be honey .

如果阀体的材料是可以焊接的，但 膨胀系数差异很大，或者工作温度的变化幅度范围较大，螺纹 连接 部必须进行蜜封焊。

Based on the Model 4.1 Precision differential thermobalance a micro - differential thermal analytical device was equipped by substituting a plate type thermocouple for the original junction Model .

用平板式热电偶代替点状 热电偶，在4.1型示差精密热天平上安装了一个微量差 热装置，与原仪器的温控仪，差热放大器、记录器组成微量差 热 仪。

Applying this method to a real and typical package and retrieving equivalent thermal resistance network we obtain a fast and accurate formula for junction temperature in steady state .

本文应用这种电与 热等效的方法，对实际的封装模型进行等效 热阻网络的提取和简化，得到快速而准确的稳态 结温的计算公式。