In this paper the hydrokinetic model of the mass transfer zone ( MTZ ) is proposed on the basis of the four basic assumptions .

本文在固定床层的原有基本概念基础上，提出传质区饱和度的新概念。并通过四个基本假定建立起 传质 区流体动力学模型。

Features of NNW - striking structural transfer zone in North Tarim and its inspiration for oil exploration

塔里木北部地区北北西向构造 变换 带特征及对石油勘探的启示

Spatial variability of soil water retention function is a primary prerequisite for quantitative research on water movement and solution transfer in unsaturated zone .

土壤水分特征函数空间异质性是定量研究土壤非饱和 带水分运动以及溶质 运移的先决条件。

An equivalent thermodynamic system is established to determine heat transfer coefficient among each zone thus the accuracy of this model has been improved .

该模型通过建立宏观等效系统确定了 各区之间的热 交换系数，提高了模型精度；

Based on the equality rule of operation velocity the magnification error of the height of mass transfer zone was about 10 % . Thus the value of the height of mass transfer zone in miniature can be the base of the adsorber design .

按照操作线速度相等的原则进行固定床设备的放大， 传质 区长度的放大误差在10%左右，实验所得传质区长度的结果可作为吸附柱设计的基础。

This paper discusses the structure features and mechanism of three larger accommodation zones in Linqing Depression such as Fengqiu sinistral transfer zone Malin transverse anticlinal accommodation zone and Xiajin & Yaozhan oblique anticlinal accommodation zone .

讨论了临清坳陷内3个规模较大的调节构造带，即封丘左行 传递 带、马陵横向背斜调节带和夏津&腰站斜向背斜调节带的构造特征及成因机制。

A new method of enhancing heat transfer in grinding contact zone with jet impinging is presented on the basis of analysis on the mechanism of workpiece burn in creep feed grinding .

在分析缓进给磨削时烧伤机理的基础上，提出了高压射流冲击强化磨削弧 区换热的创新构想，并通过 传热学基础实验研究了射流冲击强化换热的 传热特征。

A method of modelling the heat transfer in mushy zone during solidification of steel experimental study on the mush deformation and solute redistribution

关于糊状 区 传热模拟方法的研究糊状 区变形及浓度再分布的模拟实验

A primary analysis is made on the mechanism of heat transfer in the evaporator zone of the heat pipe .

对热管蒸发 区 的 传热机理进行了初步分析。

Types of Structural Transfer Zone in Compressional Area and Its Significance of Petroleum Geology

挤压区局部构造 转换 带类型及石油地质意义

With the mass transfer coefficient decreasing the mass transfer zone widened and concentration curve slowed .

传质系数减小， 传质 区变宽，浓度曲线变缓。

For wall reactors higher heat efficiency attributes to nondisjunction of reaction and heat transfer zone .

壁反应器的反应表面和 换热表面不分离，具有较高的 热量耦合效果；

The transfer zone may form structures or traps that are prone to hydrocarbon migration and accumulation .

转换 带可以形成有利于油气聚集的构造或圈闭；

Structural characteristics and origin of transverse transfer zone in Huanghua subbasin

黄骅坳陷横向 变换 带的构造特征及成因

Calculation of Radiation Heat Transfer in a Zone Model for Building Fires

建筑火灾 区域模拟辐射 换热的计算

The complex structure deformation interior of structural transfer zone can control the distribution of strata be used as the favorable channel for hydrocarbon and then form effective hydrocarbon traps .

构造 转换 带内部构造变形复杂，控制了地层分布，其内部密集的断裂体系有利于形成相关构造圈闭，同时也为油气运移提供了有效通道。

Secondary DNS servers transfer their zone information directly from the primary DNS server and keep a copy locally .

辅助DNS服务器直接从主DNS服务器 传输其 区域信息，并在本地保留副本。

According to the theory of similarity using aerodynamic model this paper has studied the convective heat transfer in the firing zone by means of counter-thermal-flow local simulation .

本文根据相似论原理，利用空气动力模型，采取局部模拟方法，研究了隧道窑烧成 带的对流 传热。

Through setting up mass transfer model of adoption-separation of H-600 we calculated the mass transfer zone height and mass transfer coefficient and established an optimal condition for producing TP and set up a foundation for process scale-up .

通过建立H-600柱吸附茶多酚过程的传质模型，研究计算了吸附柱的 传质 区高度和总传质系数等参数，确定了优惠的吸附工艺条件、为放大设计奠定了基础。

Transfer zones are divided into 5 types in this paper : divergent transfer zone convergent transfer zones of high relief and low relief synthetic transfer zones of high relief and low relief .

转换带可划分为5种类型：离散型 转换 带，汇聚型高凸起与低凸起转换带，同向型高凸起与低凸起转换带。

It is concluded that the local provenance can be divided into three systems respectively : fault-trough sedimentary provenance system the vertical sedimentary provenance system and transfer zone sedimentary provenance system .

认为研究区局部物源可以分为三种沉积物源体系，分别为：断槽物源沉积体系、垂向沉积物源体系和 转换 带沉积物源体系。

The transfer zone within intra continent subduction orogenic belt in the tianshan Northwest China

天山陆内俯冲造山 转换 带的基本特征

The turbulence intensity and the coefficient of momentum transfer profile in this zone are also considered .

研究了 滩地区动量 传递系数沿垂线的分布规律；

Transfer zone character and its relationship to hydrocarbon in Fula Sag Sudan

苏丹福拉凹陷 转换 带特征及其与油气的关系

The calculation of height of mass transfer zone and total mass transfer coefficient of adsorption column provides a basis for the design of size-enlarged plant .

文章计算了吸附柱的 传质 区高度和总传质系数，为放大设计奠定了基础。

At lower temperature the length of mass transfer zone is shorter and the fixed bed of zeolites behaviors more efficiently .

温度越低， 传质 区长度越短，沸石固定床层利用率越高。

Improvement on Heat Transfer of Grinding Zone with Difficult-to-Machining Materials

磨削弧 区强化 换热装置的改进

The standard K - ε turbulent model and the P-1 radiation model are adopted to simulate the turbulent flow and heat transfer of firing zone .

采用标准K-ε湍流模型和P-1辐射模型对辊道 窑烧成 带内气体流场与温度 场进行了数值模拟研究。