Application Research of Unit Load Control Using Total Radiant Energy of Boiler as Caloric Value Signal

以锅炉总辐射能作为热量信号的 机组 负荷控制应用研究

Application of MAC based on double Hopfield Networks in unit load system

双Hopfield网络MAC算法在 单元 机组 负荷系统中的应用

Affect of Unit Load Change on Superheater Safety

机组 负荷变化对过热器安全性的影响

Design and Implementation of Optimized Dispatching Software System for Unit Load in Thermal Power Plant

火电厂 机组 负荷优化调度软件系统的设计与实现

The Application of Model Predictive Control in Thermal Power Unit Load

预测控制在单元 机组 负荷控制中的应用

The Key Points of DEH System Control Strategy in a 600 MW Supercritical Unit Load Rejection Test

600MW超临界 机组DEH系统甩 负荷控制的关键点

The expression for the relation between the deform and the external force of progressive rate springs with variable arm length was established by using unit load method and then the non-linear dynamics equations was given .

采用 单位 荷载法推导变撑臂渐硬性钢板弹簧变形和外力之间的关系式，进而推导出非线性动力学方程，然后采用多尺度法对方程进行求解。

The supercritical power unit load process is nonlinear time-variation and multivariable coupling .

超临界参数 机组 负荷生产过程是一个非线性、参数时变、多变量耦合的被控对象，在保证锅炉和汽轮机稳定运行的同时，还要考虑它们之间动态特性差异，实现锅炉、汽轮机协调控制。

Real-updating multivariate analysis for unsteady flows with ensemble Kalman filter The thermal power unit load system is an object with coupling and constraints .

水动力学模型与集合卡尔曼滤波耦合的实时校正多变量分析方法电厂 负荷系统是一个有耦合和约束的多变量对象。

Basing on principle of virtual work and unit load method this thesis developed the quasi static time difference method to analytically calculate the torsional deformation and time difference between signals derived from upstream and downstream of measuring tube .

本文发展了上述准静态式时间差推导方法，基于虚功原理和 单位 载荷法，解析计算了不同流速下测量管的扭转变形程度，并进而计算了不同流速下测量管上下游信号的时间差。

Auxiliary power unit load compressor

辅助动力 装置 负载压缩器

1 steel base unit load capacity : 500 lbs per linear foot .

底座 承重： 柜体可调脚直线承重500磅。

Fuzzy Identification Approach and Its Application to a Generating Unit Load System

模糊辨识方法及其在 单元 机组 负荷系统中的应用

The way of identifying the ability equipment are fixed unit load and guarantee value of product catalog .

确定设备能力的方法有 单位 负荷定额、产品目录保证值等。

This paper puts forward one kind of unit load scheduling method based on the hybrid particle swarm optimization algorithm .

在综合分析电力系统 电压 崩溃事故的基础上，提出了一种新的避免 系统 电压 失 稳 的 甩 负荷方案。

The Application of Turbine Speed-Power Control System to the Generating Unit Load Control System

汽轮机功频调节系统在 单元 机组 负荷 自动控制系统中的应用

This paper analyzed the three devices by mathematical modeling and date fitting ways we established the mathematical relationship between energy consumption and desulfurization efficiency and unit load . Then we obtained the performance curve of these equipments .

本文利用数学建模和数据拟合的方法对三个主要耗能设备进行分析，建立起设备运行能耗、脱硫效率和 机组 负荷三者之间的数学关系式，并绘制出设备运行能耗特性曲线图。

DEH system has already become an important component of unit load system and even entire power plant controls .

DEH系统已成为 单元 机组乃至整个电厂控制的重要组成部分。

The unit load system is a two-input and two-output multivariable plant with coupling and inertia .

单元 机组 负荷系统是具有耦合的两输入两输出多变量系统，具有较大的惯性。

Analysis and Tuning of Generating Unit Load Feedback Control System as Turbine is Equipped with Power-Frequency Control System

汽轮机采用功频调节系统时， 单元 机组 负荷反馈控制系统的分析和整定

Multivariable model predictive control for thermal power unit load system

单元 机组 负荷多变量模型预测控制

The concepts of load unit load and loading factor are introduced .

介绍机械 密封常用的密封面载荷、比 载荷和载荷系数。

Similarly varying load conditions as the unit load required to respond as quickly as possible to stress the extent permitted margin shorten response time .

同样，变负荷工况下，为使 机组尽快响应 负荷需要，要在应力裕度允许的范围内缩短响应时间。

The simulating result showed that when the unit load changes the maximum dynamic difference of main-steam temperature drops 13.8 % the regulating time shortens 17 % and the control character is improved well .

仿真结果表明，在 机组发生 负荷 扰动时，主蒸汽温度的最大动态偏差降低了13.8%，调节时间缩短了17%，其调节品质明显改善。

Based on the characteristics of bolier turbine unit load process a new algorithm of multivariable model predictive control is proposed .

针对现有预测控制方法在应用于 单元机组 负荷控制时存在的问题，并根据 单元 机组 负荷控制的特点，提出了一种新的多变量模型预测控制算法。

Analysis is made on variable property of air-conditioning load study is made on energy regulation method and COP varied regularity with rotating speed of engine-driven air-conditioning system interpret the unit load distribution .

对空调负荷的变化特性进行了分析，研究了发动机驱动空调的能量调节方法及性能系数随转速的变化规律，对 机组 的 负载匹配进行了说明。

The successive gradient optimization was analyzed in the application of unit load and fuel distribution and the 5 units of power plant were calculated .

本论文对煤气全利用 负荷燃料双变量逐次梯度寻优分配方法在 机组 负荷与燃料合理分配中的应用进行了分析，并对电厂5台机组进行了计算。

This is because the circumferential unit load at the pallet seating surface is directly proportional to the diameter of the seating area .

这是因为阀座垫板表面的圆周 单位 负荷与阀座面的直径成正比。