Magnesia-Zircon clinkers were synthesized using light-burned magnesia and zircon as starting materials by wet grinding processes in this work .

实验以轻烧氧化镁和锆英石为原料，采用 湿法共 磨工艺，合成了镁锆质熟料。

The influence of different ratio of wet grinding material on ball quality is researched in two 3-m ~ 2 shaft furnaces of Xing Steel the reasonable ratio found out according to the conditions of raw material and the all equipments before balling .

对邢钢2座8m2竖炉生产中使用不同比例 润 磨料对生球质量的影响进行了研究，结合原料条件与造球前各工序设备现状，找到了合适的 润 磨比。

This paper introduces the process flow the technical performances of the major equipments and technical characteristics of mode GJM-90 superfine wet grinding line of zirconium silicate .

介绍了 GJM-90型超细硅酸锆 湿法 生产线的工艺流程、主要设备的技术性能以及工艺特点。

World renowned in recycling of packaging and post-consumer materials SOREMA offers a wide range of solutions including : pre-washing wet grinding washing continuous grinding and re-grinding .

在包装物质以及消费后物质的回收领域，苏瑞玛闻名世界，可提供许多解决方案，包括：预洗， 湿式 破碎，清洗，连续破碎以及再破碎。

The fabrication of leafing flake of aluminum pigment in the way of wet grinding was studied in this paper .

本论文主要研究片状漂浮型片状铝粉颜料用 湿法 球磨的制备工艺。

In order to obtain the kinetic model of wet grinding powdered whiting in the planetary ball mill the process of wet superfine grinding of powdered whiting was studied by the BS model .

为了获得行星式球磨机中重钙的 湿法 超细 粉碎动力学模型，用BS模型研究了重钙的湿法超细粉碎过程。

The result showed that the strength of preheated and fired pellet was increased by wet grinding and adding additives .

试验结果表明， 润 磨、加入添加剂能有效提高球团强度。

The Technological Advance in the Application of Low-Chromium Alloy Cast Balls in Wet Grinding

低铬合金铸球用于 湿式 磨 矿的技术进展

Digital design method and simulation technology is applied on design and exploitation of wet grinding machine to improve the design plan shorten the cycle of product exploitation save exploitation cost and enhance competitive competence of corporation in market economy .

将数字化设计方法和仿真技术应用于 润 磨机的设计开发中，改进和完善设计方案，缩短产品的研制周期，节约开发费用，提高了企业在市场经济中的竞争力。

Studies of Rubber Linings for Wet Grinding Mills

湿式 磨矿机橡胶衬板的研究

A Study of Surface Hardening Based on Creep-Feed Wet Grinding

基于缓进给 湿 磨的表面硬化研究

Wear Mechanisms and Mathematical Models of Steel Balls in Wet Grinding

湿式 磨 矿中钢球磨损机理与磨损规律数学模型的研究

Nano-TiO_2 was pretreated by ultrasonic dispersion and the special dispersant and content were chosen . TiO_2 slurry was prepared by wet grinding method of cycle stirring ball mill and then was added into automobile coating .

通过超声分散预处理纳米TiO2和选择专用分散剂及用量，采用循环搅拌球磨机 湿 磨法制备TiO2浆体，然后加入汽车涂料中。

According to this system the simulation on the temperature distribution of dry and wet grinding arc is realized and the three-dimensional isothermal contour is achieved which can offer the theoretical foundation for studying the machining parameter 's influence on grinding temperature field .

利用该仿真系统对干式和 湿式 磨削温度场进行了仿真并得出三维等温图，为研究各加工参数对磨削温度场的影响提供了理论依据。

The Liner of Medium Chromium Cast Iron and Application in the Wet Grinding Mill

中铬铸钢及其在 湿式 磨机衬板上的应用

Failure analysis of high chromium cast iron liner has been studied by the microstructure pole-pan wear abrasion wet grinding and impact toughness .

用微观组织分析、杆盘式磨损、 湿 磨法磨损和冲击韧性等试验手段，对高铬铸铁衬板的显微组织、力学性能和耐磨性进行了试验分析。

This paper mainly sketched the main processes the present researches and development and pointed out the future directions of development of Wet Grinding Calcium Carbonate .

概述了 湿法 研磨重质碳酸钙的主要工艺流程、研究现状及其发展，指出了我国 湿法 研磨重质碳酸钙的发展方向。

The separation effect of malachite-quartz system wet grinding with zirconia is relatively superior .

其中孔雀石&石英体系在氧化锆球介质 湿 磨时获得了较好的浮选分离效果。

Wet-on-wet : The condition of printing on a multi-colour press that the succeeding coloured inks being overprinted before the previous ink has dried . The issues existed in rock wet grinding process matched with WPA plant and some improvement suggestions

湿叠湿：在多色印刷机上，油墨尚还未干，就印上另一颜色油墨的情况。湿法磷酸装置配套 湿法 磨磷矿工艺技术的改进

The results indicate that wet grinding is better than dry grinding .

结果表明， 超细 粉碎 黄铁矿时， 湿 磨 的 粉碎效果比干磨好；

Study on the composite process of wet grinding of calcined kaolin and titanium dioxide powder

煅烧高岭土与钛白粉的 湿法 研磨复合工艺研究

Failure analysis of low Cr cast iron ball for Alumina ore wet grinding

湿式 研磨铝矿低铬铸铁磨球的失效分析

Ball mill superfine wet grinding line of zirconium silicate and its technical characteristics

球磨超细硅酸锆 湿法 粉碎生产线及工艺特点

Study on Residual Stresses in Dry Grinding and Wet Grinding

干磨与 湿 磨的残余应力 试验研究

A new micro structure model of material surface layer under wet grinding conditions was proposed which can be used for explaining the boundary lubrication mechanism of cutting fluids .

提出了一种 湿式 磨削环境下工件表层的微观结构模型，可用来说明切削液的边界润滑效应。

The effects of wet grinding addition of binders etc on the property of micro-pellet were approached .

探索了 润 磨、添加粘结剂等措施对小球性能的影响；

It discusses the influence of rotary velocity of ball mill dry grinding style wet grinding style and the diameter of grinding ball to the granularity of roseite analyses the effected factors .

探讨了球磨机转速、干磨与 湿 磨以及研磨球直径对蛭石细化效果的影响，分析了其中的影响因素。

An Experimental Investigation Shallow Cut Wet Grinding Burn

浅切 湿 磨烧伤问题的试验与研究

The residual compression stress and wear resistance of the hardened layer after wet grinding are improved .

湿 磨硬化层表面的残余压应力及耐磨性有不同程度的提高，而硬化层及完全硬化区深度有所减小。

The failure of low Cr cast iron grinding ball for wet grinding of alumina ore was analysed by SEM .

采用扫描电镜等方法对 湿式 研磨铝矿用低铬铸铁磨球失效进行了分析。