test method

试验方法,检测方法,探伤方法

  • Therefore according to the similarity theory and model test method the similar system between the soil body-shield machine had been established .

    为此,首先根据相似理论和模型 试验 方法建立了土体–盾构机器之间的相似系统;

  • Laser sensitivity test method of initiating explosive material was researched and test device was established .

    研究了火工药剂激光感度 测试 技术,组建了一套用于测试火工药剂激光感度的装置。

  • Listing 17 shows the full test method with the assertions at the bottom of the test .

    清单17展示了完整的 测试 方法,以及测试底部的断言。

  • Design the test method and equipment for the new products .

    新产品的 测试 方法,测试仪器的确认。

  • Third the original expectation of the test method has not changed .

    第三, 测试 方法的原始期望并未更改。

  • Users of the products and manufacturers must test and consistent with the established test method HG / T2425-93 .

    用户对产品的检验 方法必须与生产厂家一致,符合HG/T2425-93确定的 试验 方法

  • Incomplete extraction could invalidate the test results and should lead to questions regarding validation of the test method .

    不完全提取可能使检验结果无效,也可导致 检验 方法无效的问题。

  • A test method based on remote automatic control for digital TV signal receiver is proposed in this paper .

    提出了一种基于远程自动控制、针对数字电视接收机的 性能 测试 方法

  • Test method for water penetration rate of pressure-sensitive tapes Two methods are used to evaluate the permeability of cores .

    GB/T15330-1994压敏胶粘带水渗透率 试验 方法有两种方法可用来测量岩芯的渗透率。

  • The correctness of this memory test method is also proved .

    同时证明了该存储器 测试 方法的正确性。

  • Finally introduces the test method of the IMS equipments of mobile communication network .

    分析了移动通信网IMS系统设备的 测试内容和 测试 方法

  • A test method of velocity measurement for elastic constants of composite material is proposed .

    提出了一种 实用的声学 测量复合材料弹性常数的方法。

  • Comparison between distance test method and TIC method for simulation results

    仿真结果距离 检验 方法和TIC方法对比分析

  • We should choose the suitable sweep signal and good test method to improve the precision and accuracy of frequency .

    为提高扫描过程中频率的精度和准确度需要选择合适的扫描信号和 检测 方法

  • The four steps to this combination test method are : test selection system resource utilization evaluation kernel code coverage analysis and final stress test evaluation .

    这一组合 测试 方法的四个步骤是:测试选择、系统资源利用率评价、内核代码覆盖分析以及最终的压力测试评价。

  • Test success is indicated by completion of a test method .

    测试成功通过 测试 方法的完成来指示。

  • For the first test method you can use the information directly from the WSDL .

    对于第一种 测试 方法,可以直接使用WSDL中的信息。

  • The test method and steps of product damage boundary curves based on shock response spectrum were discussed .

    讨论了基于冲击响应谱的产品破损边界曲线具体 测试 方法与步骤,该 测试 方法简单宜行。

  • Small punch ( SP ) test method has been developed and applied widely in mechanical testing .

    SP小冲杆 试验 在力学测试中得到了广泛的发展和应用。

  • A single step-stress acceleration life test method for hybrid thick film DC-DC converters was proposed .

    提出了一种混合厚膜直流-直流(DC-DC)变换器单步进应力加速寿命 试验 方法

  • The slag resistance of fused magnesia-zirconia materials with different composition has been investigated by crucible test method .

    采用 坩埚 研究了不同组成的电熔镁锆合成料的抗渣性。

  • This is true for mock objects defined in a common setUp () method or within the actual test method .

    这对于在公共的setUp()方法中或在实际 测试 方法内定义的模拟对象来说是正确的。

  • The fault mode and test method of reliability of miniature circuit breaker ( MCB ) were proposed .

    提出了小型断路器的可靠性故障模式和 试验 方法

  • The requirements for performance of automobile textiles and the standard on test method currently were presented .

    介绍了对车用纺织品的性能要求及目前执行的 测试 方法标准。

  • In this example for clarity we left some of the validation inside the test method .

    在本示例中,为了清晰起见,我们将验证的某些部分放在了 测试 方法内部。

  • The manufacture shall issue a test certificate stating the adjusted set point and the test method .

    制造商应签发试验证书,说明调整设定点和 试验 方法

  • This test method is sufficiently accurate for usual purposes such as adjusting batch quantities of ingredients for concrete .

    对于常见目的(比如调整批量混凝土的成分),本 试验 方法可提供充分的精确度。

  • This paper introduces the test method and error analysis for the photoelectric theodolite precision detection in shooting range .

    本文介绍了光电经纬仪靶场精度检测的 试验 方法及误差分析。

  • OBJECTIVE : To establish a microbial limit test method for Akafen powder and validate the methodology .

    目的:建立阿咖酚散的微生物限度 检查 ,并对该法进行方法学验证。

  • Research on Fracture Mechanics Compliance Test Method of Metallic Materials Based on Numerical Analysis

    基于数值分析的金属材料断裂力学柔度 测试 方法研究