This paper deals with the reasons why the life of angular contact thrust ball bearing is much lower and it was frequently damaged owing to superheat on operation side of the work roll in 2350 high speed aluminium foil mill .

本文分析了2350高速铝箔轧机操作侧 止 推 轴承寿命低及发生烧熔事故的原因，给出了具体的计算结果。

Compared with the ong-way thrust ball bearing with keeper in same size the number of balls of this bearing is more and its axial loading capacity is much higher its limit rotational speed is low .

与相同外形尺寸的有保持器的单向 推力 球 轴承比较，该种轴承安装的钢球数目多，轴向承载能量较高，极限转速较低。

The simulation of axial distortion of four-fulcrum thrust ball bearing pack of turbodrill

涡轮钻具四支点 推力 球 轴承组轴向变形的仿真

Thrust ball bearing is separated type bearings according to its structure is divided into one-way thrust ball and two-way thrust ball bearings .

推力 球 轴承是分离型轴承，根据其结构形式分为单向推力球和双向推力球轴承。

Multi-row radical thrust ball bearing

单列向心 推力 球 轴承

The result is meaningful to the improvement of the design of the four-fulcrum thrust ball bearing pack of turbodrill .

研究结果对 轴承组的设计改进和涡轮钻具 轴向间隙的调整有一定指导意义。

This bearing is a kind of ong-way thrust ball Bearing without keeper but with encloser and it is inseparable It canbear one-way axial loading and its dust prevention effect is good .

无保持器单向 推力 球 轴承，带冲压外罩，为不可分离型轴承，可承受单向轴向载荷，防尘效果好。

Xinchang of Zhejiang east wind of county bearing factory lie in southern districts that county of Xinchang speciality produce thrust bearing producer of the ball bearing city Xinchang .

浙江新昌县东风轴承厂位于新昌城南区是新昌县专业生产 推力轴承、 滚珠 轴承的厂家。

Double-row single-direction thrust ball bearing

双排单向 推力 球 轴承

Since the adjustment of axial clearance of assembled turbodrill has great influence on its performance and service life and the four-fulcrum thrust ball bearing pack has direct relation the axial clearance a simulation of the axial distortion of the bearing is made by means of ANSYS software .

鉴于涡轮钻具装配时轴向间隙的调整对钻具性能和工作寿命有极大影响，而四支点 推力 球 轴承组与轴向间隙有直接关系，为此选择求解精度较高的ANSYS软件对轴承组轴向变形进行仿真。

Under thrust at the time the ball will increase the load but can effectively increase the number of bearing balls .

在承受 推力时，会增大 钢球的载荷，但可以增加有效 承载钢球的数目。

Bearing a single row thrust ball bearings to the heart which has at the same time to bear a greater bearing axial load and radial load capacity .

轴承采用了单列向心 推力 球轴承，这种 轴承具有同时承受较大的轴向荷载和径向荷载的能力。

The tapered roller bearing replaces axial thrust ball bearing .

采用圆锥滚子轴承取代现有的轴向 推力 球 轴承。

Investigation of Large Titanium Alloy Thrust Hollow Ball Bearing

大型钛合金空心 推力 球 轴承 特性研究

Geometric kinetic and lifetime analysis of anti rotation mechanism with thrust ball bearing is conducted which is commonly employed in the scroll compressor of automotive air conditioning system and its wear during later stage 's operation is also analysed quantitatively .

针对汽车空调涡旋压缩机中最常见的防自转机构 滚珠防自转 止 推 轴承，进行了几何、 受 力及寿命分析，并对其后期磨损加以定性的理论分析。

Allowance Correction for Rough Turning of the End Face of Thrust Ball Bearing Ring

推力 球 轴承套圈端面粗车留量的修正

In this dissertation resorting to the model of thrust ball bearing the effect of material characteristic on the distribution of rolling contact stress field about super hard material are simulated by utilizing commercialized software ANSYS .

本文应用大型有限元通用软件ANSYS作为分析工具，以 推力 球 轴承为模型，借助于数值模拟技术研究了超硬涂层材料滚动接触行为，分析了材料特性对 轴承滚动接触应力场的影响。

Improvement of measuring method of contact point groove diameter for double-direction thrust angular contact ball bearing

双向 推力角接触 球 轴承接触点沟径尺寸测量方法的改进

Four point contract center-oriented thrust Ball bearing

双排单向 推力 球 轴承四点接触向心 推力 轴承

Contact simulation on thrust ball bearing based on ANSYS

基于ANSYS的 推力 球 轴承的接触仿真

Transient Thermal Analysis of Main Thrust Ball Bearing During Fuel Cut off for Aeroengine Oil System

航空发动机滑油系统断油时主 推力 球 轴承的瞬态热分析