tin bronze

美[tɪn brɑnz]英[tin brɔnz]

锡青铜

Examples

  • Finally the limitation of low tin bronze plating applications is evaluated .

    最后对光亮低 锡 青铜的适用范围作了正确的评估。

  • The aluminum bronze alloy is a novel copper alloy . Its mechanical properties significant due to the brass and tin bronze as expensive metal alternatives are widely used in automotive 、 marine 、 aerospace and other fields .

    铝青铜合金是一种新型的铜合金，它的综合机械性能明显优于黄铜和 锡 青铜，可作为一些昂贵金属的替代品被广泛应用于汽车、船舶、航空航天等领域。

  • Effects of diffusion process on sintering properties of partial alloyed tin bronze powder

    扩散工艺对部分合金化 青铜粉末烧结性能的影响

  • Determination of Phosphorous in Tin Bronze Brass and Electrolytic Copper with Single Extraction Molybdenum Blue Method

    一次萃取钼蓝法测定 锡 青铜、黄铜、电解铜中的磷

  • Study of the Extrusion Forming of High Tin Bronze

    高 锡 青铜的挤压成形研究

  • Evaluation of uncertainty in the determination of Sn in tin bronze by photoelectric direct reading spectrometry

    光电直读光谱分析法测定 锡 青铜中锡不确定度的评定

  • Copper casting type of products : copper ( copper ) aluminum bronze tin bronze brass special brass ( brass silicon manganese brass ) lead brass ( Brass Rail ) and Cu-Zn binary alloy ordinary brass .

    铜产品铸造种类：紫铜（纯铜）、铝青铜、 锡 青铜、黄铜、特殊黄铜（硅黄铜锰黄铜）、铅黄铜（铁黄铜）及铜锌二元合金的普通黄铜。

  • The essay introduces a new method of repairing the tin bronze three oil wedge motive bearing according to the practical working experience . It analyses the nature of heat treatment of the material .

    根据实际工作经验介绍了 锡 青铜三油楔动力轴承的一种新的修复方法，并分析了其材料的热处理性质。

  • A production line of tempering tin bronze plated bead wire is described including treatment of steel wire before plating process of chemically plating tin bronze technical parameters of processing set up of equipment and main processing stages .

    详细介绍了 镀锡 青铜回火胎圈钢丝生产线，包括镀前钢丝工艺和化镀锡青铜生产线的工艺流程、加工技术参数、设备组成及主要工序。

  • Determination of Micro Amounts of Al in Tin Bronze

    锡 青铜中微量铝的测定

  • The tin bronze is the main lining materials as tank cage and ear in mine wears seriously in application .

    锡 青铜是矿井中作为罐笼罐耳内衬套的主要材料，使用时磨损严重。

  • The tribological properties of PTFE-embedded tin bronze bearing material were studied using a pin-on-disk friction and wear tester .

    用端面摩擦磨损试验机考察了 锡 青铜镶嵌聚四氟乙烯（PTFE）自润滑轴承材料的摩擦学特性。

  • MOVABLE CONTACT : Tin bronze silver plated .

    游动联系人： 锡 青铜，镀银。

  • Study on a New Type of Prealloyed Tin Bronze Powder and Its Properties

    新型 锡 青铜合金粉及其性能研究

  • A range of sophisticated nuance neutral coloured vegetal and metallic greys from pale aluminium to tin bronze changing through time with oxidized and rusty shadows .

    一系列微妙的色彩，中性色，从灰铝色到 锡 青铜 色随时间氧化的锈迹阴影中提取的植物灰和银灰色。

  • Study on Lateral Compression Pressing of Tin Bronze for Continuous Extrusion

    基于连续挤压的 锡 青铜侧向挤压研究

  • Standard samples like middle-low alloy steel and tin bronze have been tested by this automatic control system .

    采用该控制系统对中低合金钢和 锡 青铜标准样品进行了样品精密度实验。

  • The main wearing mechanisms of the tin bronze are fatigue splitting adhesive transference and abrasive wearing .

    锡 青铜的主要磨损机制是疲劳脱层、粘着转移和磨料磨损。

  • The establishment of the numerical simulation of material model for tin bronze alloys equal channel angular pressing analysis process of metal flow temperature distribution and stress distribution impact of friction coefficient dead zones were also discussed . 3 .

    建立 锡 青铜等通道弯角挤压的数值模拟材料模型，对金属流动过程、温度分布、等效应力分布等进行了分析，对摩擦系数、死区的影响进行了讨论。

  • The tests of refining by oxygen blow were made on melting low tin bronze .

    对低 锡 青铜进行了吹氧精炼试验。

  • The Effects of Metallurgical Factors on the Mechanical Properties of Tin Bronze

    冶金因素对 锡 青铜机械性能的影响

  • The analysis of a new repair method of the tin bronze three oil wedge motive bearing

    锡 青铜三油楔动力轴承新修复方法的分析

  • Tribological Properties of PTFE-embedded Tin Bronze Bearing Material

    锡 青铜镶嵌聚四氟乙烯轴承材料的摩擦学特性研究

  • By using tests air permeability was examined and marked on 6-6-3 tin bronze oil-bearing .

    采用试验方法对6-6-3 锡 青铜含油轴承进行了透气性测定和评分。

  • The amount of Al in tin bronze more than 1 × 10-3 % can be determined by this method .

    本法可测定 锡 青铜中1×10－3%以上的铝。

  • The Study of Spindle Base Made of ZA-27 Alloy Instead of Tin Bronze Alloy

    ZA-27合金替代 锡 青铜制造纺锭锭底的研究

  • Diffusion Bonding of Tin Bronze to Steel

    锡 青铜与钢的扩散连接

  • The result indicated that a non-crack tin bronze coating which has a metallurgy union with the substrate was obtained on the brass substrate by using the optimal laser power and scanning velocity .

    结果表明，采用优化的激光功率和扫描速度，可在黄铜基体表面熔覆与基体呈冶金结合、无裂纹的 锡 青铜合金修复涂层；

  • The Measurement and the Application of the zinc Content of the tin Bronze 6-6-3

    锡 青铜6-6-3中锌含量的测定及应用

  • Study on Friction and Wear Properties of Al_2O_3-40 % TiO_2 / Tin Bronze System

    Al2O3-40%TiO2涂层/ 锡 青铜的摩擦磨损性能研究