Disposition system research of doubling winder product driven by customer demands

客户需求驱动的 并纱机产品配置系统研究

Research on Reducing Ramie Yarn Hairiness on the Winder Using Nozzle

利用喷嘴在 络 筒 机上减少苎麻纱毛羽的研究

Application of Finite Element Method to Design of a Winder Main Axle Installment

有限元法在 提升 机主轴装置设计中的应用

Analysing on the main factors affecting the riding comfort of hydraulic winder

影响液压 提升 机乘坐舒适性的主要因素分析

Danfoss 's motion control card has high precision control ability add the software developed by Danfoss specially for center winder it can been used in these application .

丹佛斯的运动控制卡有很高精度的控制能力，加上丹佛斯专为卷绕行业开发的中心 卷绕程序，能很好地解决这个问题。

Based on the introduction of technical process and criteria for an automatic double-fly-fork winder ( ADW ) the hardware and software of control system are designed in this paper .

本文在介绍全自动双飞叉嵌线式转子 绕线 机工艺流程和技术指标的基础上，设计了绕 线 机的控制系统硬件结构和控制系统软件程序。

This paper has adopted the feedforward control method which is based on the winding control so as to improve the winder 's controlling performance of acceleration or deceleration .

在卷取控制的基础上应用前馈控制补偿的方法，以此来改善 复 卷 机在加减速时的控制性能。

Hydraulic center-shaft winder When swinging transmission machine operation the force constant rotation axis to make efforts before and axial rotation move backward .

当摇摆传动机械运行时，等速旋转入力轴使出力轴向前和向后 旋动。

Application of Aluminum Alloy High-speed Cutting Technology Used in the Processing of Parts of Automatic Cone Winder

铝合金高速切削技术在自动 络 筒 机零件加工中的应用

In fibre manufacture of chemical plants it requires good quality to the high-speed winder .

化纤生产中，高速 卷绕 头 控制 的 关键是提高卷绕速度 控制 的 精度。

The Reason Analysis and Eliminate Method Discuss to Strain Imba - lance of Multirope Friction Winder Steel Wire Rope

多绳摩擦 提升 机钢丝绳张力不平衡原因分析及消除方法

The utility model in particular relates to a winder which is used to wind in a plastic film production process .

本实用新型特指一种塑料薄膜生产工艺中用于 收卷的 收 卷 装置。

Application of the feedforward control method in winder velocity modulation system

前馈控制在 复 卷 机调速系统中的应用

Analysis and Research on Key Mechanism of New-Style Automatic Winder

新型自动 络 筒 机关键机构的分析与研究

Electron control semi-automatic winder

电子控制半自动 绕 线 机

Also upon start - up higher tension are developed because the winder must overcome spool inertia .

另外，在 络纱 机启动时，由于需要克服筒子的惯性，会产生较大的纱线张力。

The document will discuss the solution and experience of Danfoss center winder option card used in stress-relieving control .

本文介绍了用丹佛斯变频器和中心 卷绕卡实现带张力锥度控制要求的中心 卷绕的办法和经验。

In this paper the experimental research on vibration is made in the light of a living example of tower-type multi-rope friction winder .

根据塔式多绳摩擦 提升 机的运行特点，分析了振动原因，建立了振动故障源的模糊综合评判模型。

Research and Development on Sensor for Wire-rope Dynamic Tension of Multiple-rope Winder ;

对矿井多绳摩擦 提升过程的钢丝绳张力及动张力的变化进行了研究。

RHW-63 general-purpose NC loop wire winder is one of the most advanced loop winding devices in China and is preferred in the transformer production industry .

RHW-63通用型数控环形 绕 线 机是国内最先进的环形绕线设备之一，为互感器生产行业之首选。

Analysis of Rope Tension at Skip Suspension of Friction Winder

多绳 提升箕斗悬挂点钢丝绳张力变化规律分析

Small Intelligent Winder Based on Electronic Braking Mode without Gear

基于电子刹车模式的无齿轮装置智能小型 绕 线 机

The boiler used by such locomotive was the one removed from a small winder the wheel being bought as the waste cast iron and the body framework was made from U-shape iron .

它用的锅炉是从一个小型 卷扬机上拆下来的，车轮是当铸铁废料买来的，车身支架是用U型铁制造的。

Furthermore provision must be made to stop the spool if for any reason the winder stops .

另外在任何情况下，如果络纱机停车，应采取措施使 筒子停止回转。

It is difficult to control the winder of heat setting machine if the tapered tension control is needed .

热定型机 末 道 收 卷如果有张力锥度控制的要求，一般解决办法比较困难。

Quality Controlling and Utilization Maintaining of JZ-style Sinking Winder automatic rotation stopper

JZ型凿井 绞车生产质量控制与使用维护自动旋转伸缩式凿岩 机

The Design of SCM Control System for Winder

绕 线 机单片机控制系统的设计与开发

The Application of IPC in the Winder Monitor Control System

工控机在 纸厂 复 卷 机监控系统中的应用

Place bobbin winder 3 in the belt cover and position it so that it does not contact the machine arm or the belt cover before fixing it with wooden screws .

把 绕 线 装置3放到皮带护罩里，调整到不接触机架和皮带护罩的位置，然后用木螺丝进行固定。

Study of Mechanical Model and Tension Control Strategy of Soft and Wide Sheet in New Surface Winder

摩擦 收 卷中柔幅材料力学建模及张力控制策略研究