The Experimental Study on Hospital Swage Treatment Process and UV-H_2O_2 Disinfection

医院 污水处理工艺及UV-H2O2消毒实验研究

The optimal range of lifting height of the casing swage is worked out and it is indicated that reasonable impact height should be selected in the remedial operation according to the minimum run through size .

最后推导了 整形 器提升的最佳高度范围，指出在冲击整形时应根据最小通径选择合适的冲击高度。

The Analysis of Cracks in the Cold Swage Tube

冷缩 口管产生裂纹原因分析

Probe into Ways of Denitrification and Dephosphorization in Urban Swage Basic Research on Dephosphorization and Denitrification by Electrode-SBR

关于城市 污水中氮磷去除的探讨废水的电极&SBR法处理效果初探

Finite element analysis of the horizontal casting swage was carried out with ANSYS software and the limited fracture load of the casting swage was calculated .

利用ANSYS软件对水平连铸 铸铁 型材 的 切割 压 断过程进行了有限元分析，并计算了铸铁型材被压断的极限载荷。

There are certain corrosion and scaling phenomena in swage system .

污水系统存在一定腐蚀和结垢现象。

Test selection and application of porcelain filter in the swage treatment system of a copper smelter acid plant are described .

介绍陶瓷过滤机在铜冶炼烟气制酸装置 污水处理系统中的试验、选型及应用。

Non-overlap swage forging technology on pick cutter body

镐形刀体无飞 边 胎模锻工艺

The once prosperous area is filled with trash and swage sewage and lacks electricity .

这个曾经繁荣的地方充斥着垃圾和 污水，而且供电不足。

In this paper according to the factual case of city sewage treatment plant we analyzed and designed an automatic control system for swage treatment what is based on field bus technology .

本文根据城市污水处理厂的实际案例，分析并设计了基于现场总线技术的城市 污水处理自动控制系统。

Microstructure mechanical property and recrystallization behavior of swage strengthened tungsten alloy

钨合金材料 锻造 变形强化的组织与性能及其再结晶行为

So a detailed research of reshaping technology of the pear-shaped casing swage has been done in this thesis . First serious consequences of casing damage and the necessity of casing repair operation are studied by a survey of casing damage and its research status at home and abroad .

首先，本文调研了国内外 套管损坏情况及套损研究进展状况，分析了套管损坏造成的严重后果及套管修复作业的必要性。

Also the frequently-used reshaping technologies of the casing deformation are analysed . Second a mechanics model of reshaping process of the pear-shaped casing swage is established on the basis of the elastic-plastic theory analysis of casing .

其次，对套管变形过程进行了弹塑性理论分析，在此基础上建立了梨形胀管 器 整形 修复 变形套管的力学理论模型，确定了整形力的理论计算方法。

Objective w_1054 To understand the effect of swage chloridizing disinfection in the hospitals of Heping District of Tianjin .

目的了解天津市和平区医院 排放 污水的氯化消毒效果。

Automatic Control System Based on Profibus for Swage Treatment

基于PROFIBUS的 污水处理 厂自动控制系统的研究

For the preparation process you will still use drinking water but for the post-dilution you can use cleaned swage water .

在制备过程中，Continfloc仍然使用自来水，但二段稀释可以使用处理过的 污水。

Automation control of foundry swage mixture process is presented in this paper by means of the network control using PC and PLC .

介绍了利用微机与PL C联网控制以实现铸造 型砂混 制过程的自动化控制。

Swage tube connection is an internationally acknowledged technology meeting the requirements of environment energy and high reliability comprising two types of single and double ferrules .

管 挤压连接是国际公认的高环保、高节能、高可靠技术，有单箍式和双箍式两种。

Finite Element Analysis of Continuous Casting Swage Cutting and Pressing Process Based on Ansys

基于ANSYS的连铸 型材切割压断的有限元分析

Flatter : a flat-faced swage or hammer used by blacksmiths .

平整工具：铁匠用的一种平面 铁模或铁锤。

Pear-shaped casing swage has been widely used in oil field workover operation due to its simple operation strong durability and lower cost .

梨形胀 管 器因施工操作简单、耐用性强、成本较低，被广泛应用于油田修井作业。

When swaging vinyl-sheathed wire rope always retract sheathing to reveal wire rope before proceeding to swage .

当锻乙烯护套钢丝绳，始终收回护套透露，然后再进行 扣压钢丝绳。

The process of interference-fit between swage - locking pin and composite laminate has been analyzed by introducing the static state contact arithmetic .

在分析过程中采用静态接触算法模拟环槽 铆钉与复合材料板的干涉配合过程。

An experimental study on technique of up-flowing kind of two-stage biological aerated filter was described in the paper effect of volumn load and hydraulic retention time on efficiency of swage treatment were studied .

对上流式两段曝气生物滤池处理生活 污水进行了试验研究，探讨了不同的容积负荷及不同的水力停留时间对处理效果的影响。

By using the long sheath thermocouples which pass through the containment and are sealed by the swage lock the traditional commutator for temperature measure signal is avoided .

铠装热电偶 组件直接贯穿反应堆容器，在容器外采用 卡 套密封，避免了高温容器内信号的转接。

However the theoretical analysis model of the shaping process and the analysis of optimization design scheme of the pear-shaped casing swage are rare .

但目前缺乏梨形胀管 器整形过程的理论分析模型及结构优化设计的分析方案， 因此 本文对梨形胀管 器 整形工艺 做了详细的研究。

Application of Energy Method in design of Hollow Swage

能量法在 凹 模设计中的应用