This product is used primarily for hand lay-up pultrusion RTM and filament winding process etc.

玻璃纤维缝编短切毡主要用于手糊、拉挤、RTM和 缠绕等玻璃钢成型 工艺。

The composite skirt for solid rocket motors is commonly fabricated by winding process .

固体火箭发动机壳体连接复合材料裙段构件常采用 缠绕 成型，由于难以实现整体 成型，构件性能受连接处 强度的制约。

According to filament winding process a composite flywheel rotor laminated winding process was approved .

其次，结合复合材料 缠绕 成型 工艺，进行了复合材料储能飞轮分层结构的工艺设计。

The tension detecting system of a numeral controlled winding machine is designed according to winding process based on analysis on ; system requirements .

针对 缠绕 加工的实际状况，在分析系统需求的基础上，设计了数控缠绕机张力的在线检测系统。

The three most commonly used method of manufacturing FRP are Cross-winding process continuous winding process and the centrifugal casting process .

国际上现有三种制造夹砂压力管的工艺方法。它们分别是，交叉缠绕工艺、连续 缠绕 工艺和离心浇铸工艺。

Tension analysis of filament winding process

纤维 缠绕 过程中的张力分析

This UP resin is a high performance and chemical resistant resin which is suitable for winding process .

实际使用表明，该树脂为优良的耐化学树脂，并适合 缠绕 成型 的 工艺要求。

The study can provide an effective method for the winding process of high performance thermoplastic composites .

该 方法的研究，为高性能热塑性树脂基复合材料的 缠绕 成型提供了一种有效手段。

Numerical Simulation Study on Effects of Hydrodynamic Force on Nucleosome Winding Process

液动力对核小体 缠绕 过程影响的数值模拟研究

Overview of FRP filament winding process control system

玻璃钢纤维 缠绕 过程控制系统的研究现状及展望

Study on the semi transparency and filament winding process of epoxy FRP pipe is conducted and three process measures of improvement for filament wound FRP epoxy pipe are given in this paper and semi transparent filament wound FRP epoxy pipe is manufactured .

本文通过对环氧玻璃钢缠绕管半透明现象及 缠绕 成型 工艺的研究，提出了提高环氧玻璃钢缠绕管层间性能的三项工艺改进措施，制造出半透明的环氧玻璃钢缠绕管。

Filament winding process is well suited to the manufacture of rotationally - symmetric components .

纤维 缠绕 工艺适合于制造旋转对称制品。

This paper introduces the present status of winding process and equipment proposes the idea of CAD / CAM technology used in FRP winding process and discusses its realizing method .

本文介绍了当前 缠绕 成型 工艺 技术和设备的发展现状，提出了将CAD/CAM技术应用于FRP缠绕成型工艺的思想，并探讨了其实现方法。

This paper introduces the idea of CAD / CAM technology applied to the winding process of the tube - shaped pressure vessel .

本文将CAD/CAM技术应用于筒形压力容器 缠绕 成型 的 工艺中，介绍了其实现 过程。

Carry out the line styles and analysis the winding process .

对 缠绕 机进行运动仿真， 仿真 缠绕 过程， 生成 缠绕线型，并分析线型。

The tension control is the key technique in the filament winding process to guarantee the product quality .

纤维 缠绕 中张力的控制是关系到产品质量的关键技术。

Clearing yarn parameter should be set rationally in winding process .

络 筒合理设定清纱参数；

The mould gel coat formulation and winding process of high performance FRP electric insulating tube were summarized .

本文介绍了玻璃钢高强电绝缘管的模具、胶液配制及 缠绕 成型 工艺。

Winding process design with carbon fiber / epoxy on rubber liner

碳纤维/环氧树脂在橡胶内衬表面的 全 缠绕 工艺设计

To ensure the wire quality tension must be kept in stable during the winding process . In this thesis a tension closed-loop control system with magnetic particle detent as actuator is designed and power circuits for driving are developed to drive magnetic particle decent .

在 绕 丝过程中，为了保证焊丝的质量，必须在 缠绕 过程中保持张力稳定，在论文中设计了以磁粉制动器为执行器件的闭环张力控制系统，设计了磁粉制动器功率驱动电路。

A new method of controlling the winding velocity in the winding process is introduced .

介绍一种 卷绕速度控制的新方法。

Requirements of Compact Yarn on the Winding Process

聚集纱对 络 筒 工序的要求

It is used primarily for hand lay up process filament winding process and press molding of FRP products .

短切毡主要通过手糊成型工艺， 缠绕成型 工艺，模压成型工艺用于加工制作玻璃钢产品。

Non-contact dynamic measurement of yarn tension in winding process

非接触式纱线 卷绕张力动态检测方法的研究

The production process of PET slub FDY was introduced . The effects of chip quality spinning temperature cross air blow and winding process on the production of PET slub FDY were discussed .

介绍了涤纶FDY竹节丝的生产过程，探讨了切片质量、纺丝温度、侧吹风、 卷绕 工艺对生产FDY竹节丝的影响。

Yarn hairiness forms in spinning process and increases in winding process .

系统地分析了纱线毛羽产生的原因，纱线毛羽形成于细纱工序，增加于 络 筒 工序。

The application of continued fractions theory in the practice of filament winding process is introduced in this paper which is the deepening understanding for filament winding principle .

本文介绍了连分数（ coutinuedfractions）理论在纤维 缠绕实践中的应用，指明这是对纤维缠绕规律的深化认识。

Fibre winding process is an important method of manufacturing high - strength composite material products .

纤维 缠绕 成型是制造高强度复合材料制品的一种重要 工艺方法。

Two effective control projects are discussed for controlling the tension in filament winding process by tension cause analysis which adopts magnetic particle clutch and torque motor respectively as the control elements .

本文主要通过对张力产生的分析，论述了分别采用磁粉离合器和力矩电机作为控制元件，对 张力 进行有效的两种控制方案。