test pump

试验泵

  • Temperature Test for Pump Motors

    泵房电动机温度 检测 可靠性 煤泥 的设计 研究 应用

  • Design about frequency conversion timing system of hydraulic support test pump station

    液压支柱 试验 泵站变频调速系统设计

  • Function test and automatic controller test for ballast pump .

    压载 效用试验和自动控制装置 试验

  • This paper establishes the test method of the simulation for test pump and carries out deeply the wear study of the high pressure pump for testing antiwear oil .

    本文通过建立的 试验 模拟试验方法,对抗磨液压油试验用高压泵的磨损情况进行了深入研究。

  • Since then to actual production process in charge pump high-pressure system failure problems through the design of the product to circuit analysis combined with the technology process and grain round to test charge pump high-pressure system failure problem discussed .

    此后以实际生产过程中所遇到的电荷泵高压系统失效问题,通过对产品的设计电路分析,结合工艺制程和晶圆 测试对电荷 高压系统失效问题进行了比较详细的分析。

  • The components testing lab can conduct test on fuel pump exhaust system air blower water pump oil pump and different kinds of electrical appliances etc.

    零部件试验室可以进行 油泵、气道、气泵、水泵、机油泵、电器等多种 试验

  • Loading and unloading the piping pressure could be done by the SB-4.0 manual hydraulic test pump .

    通过SB-4.0型手动 对压力管道进行加、卸压 试验

  • Note : auto-control hydraulic test pump achieves automatic control of pressure by adding a set of control devices on the basis of the original electric hydraulic test pump .

    注:压力自控 是在原电动试压泵的基础上加装一套控制装置,来实现压力自动控制功能。

  • Cavitation test of centrifugal pump shows the same conclusion .

    对离心 进行汽蚀 试验并得到了相同的结论。

  • According to the concrete request of the test pump this close test circuit project of the high pressure pump platform is made out .

    根据被 的具体要求,制定了高压泵实验台的闭式实验回路方案。

  • This bulb-type tubular pump has these key technologies during the construction that is the analysis of comparation and selection of the technical projects and the set-up scale model test of pump system .

    二级坝泵站贯流式水泵技术方案的分析比选、定型和 水泵装置模型 试验,是该 泵站工程建设中的关键性技术。

  • The characteristic test of hydraulic pump requires a high response so it is important to design an appropriate test system for hydraulic pump test .

    液压 特性 试验对测试响应时间要求很高,因此建立一种合理的测试系统是非常重要的。

  • These measures include adopting the emergency diesel generator steam turbine-driven hydrostatic test pump and high temperature O-ring which is able to withstand 288 ℃ during station blackout .

    这些措施包括配备应急柴油发电机、配备气轮机驱动的水压 试验 、采用耐288℃高温的O形圈。

  • Perform leak test on high-pressure pump .

    对高压 执行泄漏 测试

  • Test of pump in industry only achieves performance degradation data it is difficult to evaluate reliability with traditional reliability model .

    建立了 的二 元正态分布性能可靠性模型和相应评估方法;

  • Put up the definition and calculate method for internals between two injections . Based on the high pressure common rail test pump bench open ECU and high speed photography the effect of fuel spraying and atomizing by internals between two injections had been researched . 3 .

    提出了两次喷射间最小时间间隔的定义和计算方法,并基于高压共轨 燃油 喷射 实验台、开放式电控单元及高速摄影技术,研究了两次喷射间时间间隔对燃油喷射雾化状况的影响。

  • Hydraulic Test of Pump Sumps of Thermal ( Nuclear ) Power Plant s

    火(核)电站循环 水泵房前池水力模型 试验研究

  • Examine block for cracks or fractures . Use this test in conjunction with the Fuel Pump Pressure Test and Fuel Pump Capacity Test .

    测试泵体裂纹或破裂。与油泵压力 测试 油泵容量测试一起进行该测试。

  • Through piping model test and pump unit trial it is shown that with the two types of isolating shims the vibration acceleration of the piping system can be reduced evidently .

    经管路模型 试验 水泵机组试验证明,这两种隔振垫可使管路系统振动加速度级明显下降。

  • Determination of ellipse envelopes in ex factory test of pump CAT

    CAT出厂 试验中椭圆包络线的确定方法

  • A set of automatic testing system to test the screw pump capability is introduced .

    介绍了螺杆 性能 试验的自动测试系统。

  • Outlines the wear system of test pump and the wear form of friction pairs analyze the anti-wear performance mechanism for different kinds of hydraulic transmission fluids and their additives .

    其次简述了 试验 的磨损系统及摩擦副的磨损形式,并针对不同种类的液压传动工作介质及其添加剂进行抗磨性机理分析。

  • Base on these data the author established regressive equation summarized and analyzed the influence of the high rotational speed and different compress cell on the test pump .

    对这些 实验数据建立回归方程,总结分析不同的高转速和不同增压单元对多相 输送的影响。

  • Analysis on Temperature Rising of Medium Circulating Test for Pump Set

    机组循环 试验介质温升分析

  • Remote control test for fire pump and emergency fire pump .

    消防 、急消防泵遥控操作 试验

  • The model test of pump system was carried out .

    进行了 装置模型 试验

  • This paper introduces design and test of water pump which is suitable for mini-type upright shaft wind power machine .

    介绍了与小型独立运行的立轴式风力机械相匹配的 水泵设计和 试验

  • Model Acceptance Test of the Pump Turbine of Hohhot Pumped Storage Power Station

    呼和浩特抽水蓄能电站 水泵水轮机模型验收 试验

  • The multiple-function pump test-bed can not only test pump 's inner and outer performance but also carry out to test water turbine and small type of water hole .

    多功能水泵综合试验台不仅可以进行 水泵的内外特性 试验,而且还可以进行水轮机试验和小水洞试验。

  • Prototype Test on Pump Unit Performances of Jiangdu Second Pump Station in the Source of the South-North Water Project

    南水北调源头 江都第二抽水站原型性能 试验研究