test glass

n.试杯

Examples

  • Adhesive Test of Optical Glass

    光学 玻璃的胶接 试验

  • We test the melt glass viscosity and determine the drawing process parameters .

    测试了熔体粘度，得到了 拉丝过程仿真的基础数据。

  • By means of outdoor exposure test under glass test artificial accelerated test corrosion apperance and product analysis the corrosion prevention data for a number of metal plating and the economical acid rain corrosion prevention metal plating technology were obtained .

    通过金属覆盖层的自然曝露 试验、 玻璃框下曝露试验、人工加速试验、腐蚀形貌和腐蚀产物分析，考核了不同金属覆盖层的防蚀性能，筛选出了耐酸雨的经济有效防护体系。

  • Investigation of Strength Test of Unidirectional Glass Fiber reinforced Plastic Rods

    单向 玻璃纤维增强塑料杆材强度 测试研究

  • Corrosion resistant properties analog test of mining glass fibre net false roof materials

    矿用 玻璃纤维网假顶材料的耐腐蚀性能模拟 试验

  • Impact test study of glass waste forms

    模拟高放废物 玻璃固化体冲击 试验研究

  • ART OF GLASS ANNEALING OF GLASS Methods : The ways of hot plate test feet swelling test funnel test sheet glass test were used .

    方法：采用热板法、足肿胀法、漏斗 法、 玻片法。

  • The Product Performance Test of the Glass Insulators Used for 30 ~ 40 Years

    运行30～40年后 玻璃绝缘子寿命周期的性能 测试

  • Uniformity test of optical glass by laser holography

    光学 玻璃均匀性的全息法 检验

  • Standard test for glass viscometer

    玻璃粘度计标定 试验

  • Coating a narrow band-pass optical filter by using back reflective method monitored on a static and change-able test glass

    在固定比较片上用上反射监控方法生产窄带干涉 滤光片

  • A Test on Producing Glass from Kaolin Tailings in Fuzhou Jiangxi

    江西抚州高岭土矿尾砂 研制工艺 玻璃

  • Relationship between test frequency and glass transition temperature was studied for four TATB based PBXs and their binders ( fluoropolymers ) by using dynamic mechanical analysis ( DMA ) method .

    用动态力学分析（DMA）方法，研究了四种TATB基PBX及其粘结剂（氟聚物）的 测量频率与 玻璃化温度的关系。

  • And the rate of specific reaction was 95 . 8 % . Test tube precipitation test . glass sheet coagulation test .

    专化性反应率为95.8%.在检测技术研究中.进行了试管沉淀 法、 玻片凝集法、环状界面凝集法和对流免疫电泳4种试验。

  • Methods for thermal shock test of laboratory apparatus glass ( stick method )

    GB/T15727-1995实验室仪器 玻璃热冲击 试验方法（（棒状法）

  • Built-In Test Indicator Sight Glass

    内建型 显示器仪表壳 玻璃

  • The reflectivity is 92.68 % test on the glass at 400 ℃ which is close to the theoretical data 96 % . Part of the research results have been used in the chip manufacture .

    400℃退火，在 玻璃上 测试的有Cr/Pt覆盖层的Ag的反射率达到92.68%，与理论值96%很接近。以上研究结果在本单位生产基地芯片生产中部分采用。

  • A heat-resistant silicone resin is selected as a good coating of organic material by TGA and IR test . The glass filler silicone resins solvents and other additives was formulated into a high-temperature coating according to a certain percentage .

    通过热重和红外 测试来选择一种耐热性好的 有机硅树脂作为涂层的有机基料。

  • On problem in tensile test for glass fiber reinforced plastics

    玻璃钢拉伸 试验问题

  • Color indicator of green tea and color card of sensory test A glass tube containing catalyst 401 which is used as a color indicator for trace amount of oxygen was connected with the sample tube to monitor the purity of carrier gas during operation .

    绿茶表色及感观审评用 色卡方法的研究为了检测载气的纯度，在样品管进口直接连接装有变色的401型脱氧催化剂的 检测管。

  • Coil coatings was thermal analyzed and researched with DSC in order to test glass transition temperature ( Tg ) of the paint film at the maximum precoated metal temperature ( PMT ) and determine the optimal curing conditions of different coil coatings .

    采用DSC进行卷材涂料热分析研究， 测试在不同PMT（最高金属板温）下漆膜的 Tg，以确定各种卷材涂料的最佳固化条件。

  • The Design and Test of Ellipsoidal Glass Capillaries as Condensers for X Ray Microscope

    X射线成像旋转椭球聚焦 镜的设计与 检测

  • Meanwhile combining the results of indentation tests determined the ideal parameters of cutting fluid for all the glasses . Finally complete the precision cutting test of optical glass in high-precision lathe .

    同时，结合压痕试验的结果，确定了三种光学玻璃较为理想的切削液参数。最后，在高精度车床上完成了光学 玻璃精密切削的 对比 试验。

  • A constitutive model test on glass fiber reinforced polymer ( GFRP ) tube confined concrete was carried out .

    进行了 玻璃纤维增强塑料（GFRP）管约束混凝土本构模型 试验。

  • Performance and Test of Glass Substrate for TFT-LCD

    TFT-LCD用 玻璃基板的性能及 检测

  • Study on improved double-notch shear strength test of glass laminates

    复合 材料层合板双切口层间剪切 试验的改进研究

  • Thermal shock test on glass containers

    玻璃容器耐热冲击 试验方法

  • Based on fundamental principles of thermodynamics this article presents theory of vacuum cavity on vacuum test of all glass evacuated solar collector tubes establishes theoretical mathematics model and researches its feasibility initially .

    依据热力学基本定律，提出了太阳能全 玻璃真空集热管真空度 检测的负压腔原理，并建立理论数学模型，同时还对其实际可行性及检测手段进行了初步探讨。

  • Irradiation test of borosilicate glass burnable poison

    硼硅 玻璃可燃毒物的辐照 试验