The structural feature of the single and twin screw extruder are compared .
分析比较了单 螺杆 和 双 螺杆 挤压 机的结构特点。
Corn starches were processed in Creusot-Loire BC-45 co-rotating twin screw extruder .
用Creusot-Loire BC-45型同向旋转 双 螺杆 挤出 机加工玉米淀粉。
This twin screw extruder has the feature of one-side circumgyrate it 's an ideal equipment for the small-scale factory who produce powder .
该 挤出 机是同向高速旋转 双 螺杆结构，是用于多种组份 物料经一定的温度在热状态下达到最佳的理想效果，适应小型企业生产粉末的理想设备。
Forecast and Experimental Study of Melt Filled Length of Screw Assembled Field in An Intermeshing Co-rotating Twin Screw Extruder
啮合同向 双 螺杆 挤出 机组合流道的熔体充满长度预测与实验研究
Mainly discussed the technical development of the driving system with high torque twin screw extruder .
着重论述了高扭矩 双 螺杆 挤出 机传动系统的技术发展。
The twin screw extruder fault diagnosis by multi-fault classifier based on SVM is mainly discussed and the retest proves that this SVM really has preferable ability of classification .
本文以 双 螺杆 挤出 机为例，介绍了基于支持向量机的多故障分类器，探讨了“成对分类”与“一类对多类”两种多类分类算法的应用。
The preparation process of maleic anhydride grafted polypropylene ( PP-g-MAH ) was studied by reactive extrusion using a twin screw extruder system and infrared spectroscopy .
利用反应 挤出技术和红外光谱分析方法，对马来酸酐（MAH）接枝聚丙烯（PP）的制备工艺进行了研究。
Knowledge of twin screw extruder operation screw configuration and how to optimize dispersion of pigments in masterbatch .
懂得如何操作 双 螺杆 挤出 机，熟悉螺杆结构，增强色母中的色粉分散性。
In this paper geometrical principle of fully intermeshing counter rotating twin screw extruder are analyzed .
本文对异向全啮合 双 螺杆 挤出 机的几何原理进行了研究，给出了端面曲线，螺杆 形状， 加工 刀型曲线的数学模型；
Flow Mixing and Reaction of Polymer in Co-rotating Twin Screw Extruder
聚合物在同向 双 螺杆 挤出 机中的流动、混合与反应
Numerical Analysis and Experimental Investigation of Mixing Effect in Kneading Disc Elements of Co-rotating Intermeshing Twin Screw Extruder
啮合同向 双 螺杆捏合块元件混合效果的数值模拟分析与实验研究
A Study on the NC Grinding Molding Method for Connecting Block of Co-rotating Twin Screw Extruder
同向 双 螺杆 挤出 机捏合块数控成型磨削方法研究
Knowledge of General maintenance of twin screw extruder and mixers .
了解搅拌机和 双 螺杆 挤出 机的基本维修。
We consummated the geometry-modeling program of heart part of twin screw extruder & the screw element and realized its 3D parametric design .
完善了 双 螺杆 挤出 机的核心部件&螺纹元件的几何造型程序，实现了三维模型的参数化设计，图形精度和计算速度有显著的提高，程序的适用性和可操作性大为增强。
The adjustment of rotation angle error of power box twin export axles of twin screw extruder
双 螺杆 挤压机动力箱双输出轴转角误差调整
Simulation of Polymer Extrusion in Metering Zone of Co-Rotating Twin Screw Extruder
同向旋转 双 螺杆 挤出 机计量段中聚合物挤出的模拟
In this paper the technique on producing special polymers in the twin screw extruder was introduced .
介绍国外研究人员利用 双 螺杆 挤出 机的新技术，包括 用 双 螺杆 挤出 机生产接枝聚合物，降解高分子等；
A Global Model for Polymer Flows in Co-rotating Twin Screw Extruder ; Failure Mechanism Analysis of the Cold Extrusion Combination Concave Die and Numerical Simulation of the Extrusion Process
啮合同向 双 螺杆 挤出 机挤出过程模拟研究冷挤压组合凹模失效分析及挤压过程数值模拟
The process of imported twin screw extruder as finishing equipment of adhesive chloroprene rubber ( CR 244 ) was introduced .
介绍了用进口 双 螺杆 挤出 机作为粘接型氯丁橡胶（CR244）后处理装置的工艺流程，探讨了其工艺条件及成品橡胶的性能。
Comparing with the normal screw element the influence of various thicknesses of kneading blocks in the co-rotating twin screw extruder on the reactive extrusion for LDPE-g-MAH was investigated .
研究了同向 双 螺杆 挤出 机中，捏合盘元件的不同厚度对低密度聚乙烯（LDPE）接枝马来酸酐（MAH）反应挤出过程的影响，并将其与常规螺纹元件进行对比。
The article discussed the Principle feature and technique of Co-rotating twin screw extruder for Polymen compounding .
本文论述了聚合物共混须用同向 双 螺杆 挤出 机的原理、特征及不同物料的共混技术。
Extrusion of HDPE pellets in flight elements combination is studied by visualized co rotating twin screw extruder .
借助于装有玻璃视窗的可视化啮合同向 双 螺杆 挤出 机，对高密度聚乙烯（HDPE）颗粒在螺纹元件组合中的 熔融 过程进行了研究。
Twin screw extruder is one of the important equipment in biodegradable starch plastic processing .
双 螺杆 挤出 机是目前生物降解淀粉塑料加工生产中的重要设备之一。
The mixing performance of different screw configurations of a co-rotating twin screw extruder and the grafting reactive extrusion of PE-LDg-MAH were investigated .
研究了不同 螺杆构型的混合性能以及低密度聚乙烯熔融接枝马来酸酐的过程，探讨了不同螺杆构型的混合性能与接枝反应接枝率的关系。
Maleic anhydride ( MAH ) and styrene ( St ) melt-grafting onto polypropylene ( PP ) was conducted in haake torque rheometer and twin screw extruder .
在哈克流变仪和 双 螺杆 挤出 机对苯乙烯（St）/马来酸酐（MAH）/聚丙烯（PP）熔融接枝进行了研究。
According to the theory of motor control and the differences of the twin screw pulping machine and twin screw extruder the theory of control system has been studied .
根据电动机控制理论，以及 双 螺杆磨浆机和 挤出 机之间的差异，对 双 螺杆磨浆 机控制系统的进行了研究。
The production process of UPVC special section material on the conical twin screw extruder using preplasticizing technique is introduced .
介绍了采用预塑化技术在锥形 双 螺杆 挤出 机上生产UPVC异型材的工艺过程。
With its high shear rate and equipped with a water pouring system the twin screw extruder could be applied to recycle above mentioned materials .
利用 挤出 机高剪切、可注水的功能实施 体型 高分子 的 分解，从而制得 性能优良的再生塑料。
双螺杆挤压机