Technology of Variable Pressure Method vacuum dry impregnation can shorten one third treatment time with increasing partial discharge pass rate of power capacitor to improve product quality and with lower energy consumption .

变压法 真空干燥 浸渍工艺能缩短时间三分之一，提高了电容器的局部放电合格率，从而提高了产品质量，节省了能源。

Study on Lactic Acid Bacteria Enriched Apple Pieces Prepared with Vacuum Impregnation

真空 浸渍法制备固定化乳酸菌苹果粒的研究

Vacuum impregnation is a technology to modify materials or reach some special demand as the effect of vacuum and impregnation .

真空 浸渍是通过负压作用和浸渍作用，改善材料性能或满足某种特定要求的工艺技术。

The process and mechanism of vacuum chemical impregnation were studied .

对 烧结式 镍 基板 的 真空化学 浸渍过程及机理进行了研究。

A key technological process to power capacitor manufacture is vacuum impregnation and the quality of impregnation can only be guaranteed by using good vacuum impregnating equipment .

电力电容器 真 浸工艺是电容器制造技术中的关键工艺，优良的真浸设备是合理真空工艺制定的基础。

Design and Research of Vacuum Pressure Impregnation Equipment and Controlling System In Food Industry

食品 真空压力 浸渍设备及其控制系统的研究设计

UHMWPE fibers reinforced PMMA ( UHMWPE / PMMA ) composites were prepared by vacuum impregnation technique . A study was made on the mechanical and friction and wear properties of these UHMWPE-fiber / PMMA composites .

用 真空 浸渍 法制备出了超高分子量聚乙烯纤维/有机玻璃（即UHMWPE/PMMA）复合材料，并研究了其力学性能和摩擦磨损性能。

The graphite foam / epoxy resin was prepared through vacuum impregnation .

本文通过 真空 浸渍的方法，成功制备了石墨泡沫/环氧树脂复合材料。

Vacuum System for the Vacuum Pressure Impregnation Plant

真空&压力 浸渍设备中的真空系统

The following results are obtained : 1 . The optimum impregnating technology of Chinese fir wood / Ca-MMT composite board has been obtained by orthogonal analysis of pressure and vacuum impregnation using weight percent gain ( WPG ) as basic index .

通过正交实验，分析了 真空 加压 浸注工艺中的各种影响因素，以增重率为基本指标，得到了杉木/钙基蒙脱土复合板材的最佳浸注工艺。

A three-dimensionally braided carbon fiber reinforced carbon / epoxy resin ( C / Ep ) composite was prepared by vacuum impregnation and the effect of air oxidation of the fibers on the properties of the composite were investigated by SEM nitrogen adsorption and mechanical testing .

利用 真空 浸渍法制得三维编织炭纤维增强环氧复合材料，研究了空气氧化处理 前后炭纤维表面状态的变化以及表面处理对三维编织复合材料力学性能的影响。

The Application of Vacuum Impregnation Technique to Vehicle Brake Valve Die-casting Part

真空 浸 渗工艺在汽车制动阀压铸件上的应用

The final major step in fabrication of large superconducting magnet coils is vacuum pressure impregnation ( VPI ) .

大型低温超导磁体线圈制造的最后关键的工艺是 真空压力 浸渍（VPI）。

The metallography samples fabricated by the vacuum pressure impregnation resin method are introduced in detail .

详细介绍了 真空 浸渍树脂法制备金相样品的制备过程。

At present the vacuum pressure impregnation technology is a new process in electrical trade .

真空压力 浸渍是电工行业中目前应用的新技术、新工艺。

Research on Application of Motors Insulation by Using Vacuum Pressure Impregnation Technology

采用 真空压力 浸 漆技术的电机绝缘的应用研究

A kind of wood-plastic composites was prepared by vacuum impregnation method with in-situ compounded nano-SiO2 modified urea-formaldehyde and aspen wood .

以原位复合纳米SiO2改性脲醛树脂为填充体，人工速生杨木为基体，通过 真空 加压 浸渍法制得木塑复合材料。

The PICA were prepared by the modified phenolic resin and carbon fiber weaves using the ordinary pressure and vacuum impregnation technique .

本文以硼改性酚醛树脂为基体，以碳纤维三维编织体为增强体，利用常压和 真空 浸渍两种工艺，制备了PICA材料。

The basic principle of vacuum impregnation technique material to be used technological process are briefly introduced . The illustrative diagram of vacuum impregnation has been given .

本文概要介绍了 真空 浸 渗新工艺的原理、使用原料和工艺流程，给出了真空渗补的原理图。

Three-dimensionally ( 3-D ) braided UHMWPE fiber reinforced PMMA ( UHMWPE3D / PMMA ) composites were produced by vacuum impregnation technique . The present study is carried out to determine the moisture absorption properties of the 3-D composites .

采用 真空 浸渍方法制备了三维编织UHMWPE纤维增强PMMA（UHMWPE3D/PMMA）复合材料，重点研究了该复合材料的吸湿性能。

The current situation and characteristic of vacuum impregnation process and equipment in refractory industry in China are analyzed and introduced .

对我国耐火材料行业的 真空 浸渍工艺及设备现状进行了分析，介绍了国产化 真空 油浸装备及 工艺特点。

Anew food process method & vacuum impregnation

一种新的食品加工方法& 真空 注入 法

Vacuum Impregnation Technology and Vacuum Impregnation Process of Coil

真空 浸渍技术及线圈的真空浸渍工艺

Activated carbon fibers supporting silver ( ACF ( Ag )) were prepared by vacuum impregnation and decomposition processes .

采用 真空 浸 清 加热分解的方法制备了载很活性碳纤维（ACF（Ag））。

The catalytic activities of active carbon ( AC ) loaded with alkali metal salts by vacuum impregnation were studied .

考察了以活性炭（AC）为载体，通过 真空 浸渍 制 备的负载型催化剂对甲基化反应的催化活性。

Of timber processing has been using CCA and ACQ wood preservatives on the vacuum pressure impregnation treatment have achieved the desired result .

对木材进行深加工处理，一直采用CCA和ACQ防腐剂对木材进行 真空加压 浸渍处理，都达到理想的效果。

This paper introduces the fundamental and characteristics of the Vacuum Pressure Impregnation ( VPI ) .

本文介绍了 真空压力 浸渍的基本原理及其特点。

Study and Application of Granite Vacuum Impregnation Colouration Technology

花岗岩 真空 浸渍着色技术的研究与应用

Vacuum Pressure Impregnation Technology and Unit for Electric Machine

电机的 真空压力 浸渍技术与设备

This paper studies the working characteristics of the control system of vacuum impregnation production line and use PLC controller to build the new automatic control system .

本文从工程角度研究了 真空 浸 渗生产线控制系统工作方式的特点，提出了基于PLC控制器的全自动控制系统。