veneer lathe

[vəˈnɪr leð][vəˈnɪə leɪð]

单板旋切机,旋板机

  • By analyze the factors of working process of the new Non-nipped Axis Wood Veneer Lathe design and improve it .

    本文主要通过分析计算 板旋切过程的各项因素,对新型无卡轴木材 切机进行了选型、设计与改进。

  • CNC log-core veneer lathe ; characteristics ; innovative structural design ; main technical parameters ; using requirements ;

    智能数控无卡轴 切机;特点;结构设计创新;主要技术参数;使用要求;

  • The design and application of the veneer lathe 's constant linear speed control circuit

    恒线速度控制线路的设计及应用

  • Hydraulic System Design and Research of Log-core Veneer Lathe

    无卡轴 切机液压系统的设计与研究

  • Working principle of log-core veneer lathe had been analyzed in detail and the mathematical model between the knife-carriage feeding speed and the diameter of the log core was established in the meantime the approximation cutting time formula was also derived .

    详细分析了无卡轴 切机的工作原理,推导了旋切过程中刀刃进给速度与圆木直径的数学模型,同时得出旋切时间的近似计算式。

  • Hydraulic double-chuck spindle veneer lathe chucker 2-axis slant bed machine

    液压双卡轴 切机双轴斜 床身卡盘机床

  • Influence of curved pitch rail slope angle of veneer lathe on knife angle in peeling

    曲面 滑道倾角在旋 切中对旋刀后角的影响

  • The optimal design of the angle controlling mechanism of veneer lathe

    角度控制机构的最优化设计

  • To improve the utilization ratio of timber many companies have developed log-core veneer lathe .

    为了提高木材利用率,许多厂家都开发了无卡轴 切机。

  • Study on the microcomputer DC speed-regulating system of veneer lathe

    板旋 机微机直流调速系统的研究

  • A Study on the Veneer Peeling Thickness of Log-core Veneer Lathe

    无卡轴旋切机单 板旋切厚度的研究

  • Hydraulic double-chuck spindle veneer lathe

    液压双卡轴 切机

  • Simulated the Variable-speed Feeding Model of Log-core Veneer Lathe

    无卡轴 变速进给模型的多项式拟合

  • Based on production practices this paper dis - cusses solutions to issues such as the parameters of peeling angle the knife position the use of pressure bar and how to ensure the quality of thick southern type poplar veneers for LVL after wear of a veneer lathe .

    从生产实际出发,对旋切角度参数、旋切安装位置、压尺的使用,以及 动机磨损以后,如何保证单板层积材用意杨厚单板的旋切质量提出了解决措施。

  • This dissertation is a new scheme in controlling system of Log-Core Veneer Lathe and is considered as a new method in equipment improvement .

    本系统是一种全新的无卡轴 控制系统的方案,它可作为现有设备改造的一条新途径。

  • A Constant Line Speed Digital System for Veneer Peeling Rotary Lathe

    板旋切机恒线速数控系统

  • Introduced briefly component part of spindleless veneer lathe and its work principle discussed the change rule of hydraulic system parameters and its influence on veneer quality .

    简要介绍了无卡轴 切机的组成及其工作原理,探讨了液压系统参数的变化规律及其对旋切单板质量的影响。

  • To improve the utilization ratio and processing precision of wood is crucial to the development of veneer peeling lathe in home and abroad .

    提高木材利用率和加工精度,是国内外 研制的关键。

  • Concurrent Engineering and Its Key Technology Analysis Application of Concurrent Engineering in the Development of Log-core Veneer Lathe

    并行工程在无卡轴 切机研制中的应用

  • The form and inclination of pitch rails of the veneer lathe which support and direct the knife assembly control the knife angle in peeling . The angle of the knife largely determines uniformity of the veneer thickness and surface quality .

    机副滑道对刀 起支承和导向作用,它的形状和倾角在旋切过程中控制着旋刀的角度,而刀角在很大程度上决定着单板厚度的均匀度和表面质量。

  • Development of New Non - nipped Axis Wood Veneer Lathe

    新型无卡轴木材 的研制

  • Knife-carriage Variable-speed Feeding Mechanism of Log-core Veneer Lathe and Its Application

    无卡轴 切机刀床变速进给理论的分析与应用

  • The basic principle of the veneer lathe and the definition of main technology parameter

    的基本原理和主要技术参数的确定

  • Hydraulic double-chuck spindle veneer lathe Wood cuttings and sawdust can be compressed into boards .

    液压双卡轴 木屑和锯末可压制成板。

  • Powered back-up roll is an auxiliary device on veneer lathe .

    动力压辊是 板旋 一个辅助装置。