Development of CAAP system of welding components assembly

焊接 结构 件装配CAAP软件应用系统开发

Effect of elastoplastic deformation on stainless steel welding components in low-temperature aging

弹塑性变形对不锈钢 焊接 构件低温时效的影响

The key of manufacture is controlling the welding quality and the welding deformations of the steel components to assure the junction quality and the dimensions of the steel beam .

制造过程的中关键在于控制 构件焊接质量和 焊接变形，从而保证钢箱梁的接头质量和钢箱梁的尺寸。

Welding Structure Design for Non-pressurized Components in Pressure Vessels

用于压力容器非受压 部件 的 焊缝设计

In the manufacturing processes of the platform the pipe and pipe connections are all finish in the form of welding . The most pipe components are near the waterline and so they are easier influenced by the corrosion and the loading of the wind .

在平台的制造过程中，圆管和圆管的连接都是以 焊接的形式完成的，并且圆管 构件大部分处于水线附近，更易受到腐蚀和风浪载荷的影响。

It can be proved that TRIZ is good for obtaining the innovative design results through the analysis of the clamp design for the welding process of automobile components .

通过对汽车 部件 焊装夹具的设计实例的分析，可以看出TRIZ理论在快速产生创新设计方案方面，有显著优势。

The Way of Increasing the Fatigue Life of Welding Components ── On the Mechanism of Crack-cutting Holes

提高 焊接 构件疲劳寿命的方法&止裂孔机理探讨

Application of vibratory welding technology to large-scale welding components

振动焊接技术在大型 焊接 构件中的应用

Therefore the measurement of residual stress is very important for guiding the use of welding components .

因此残余应力的检测和监测对指导 焊接 构件的使用非常重要。

Research on pulsed MIG welding for heavy thickness aluminum components without preheating

大厚度铝 构件无预热状态下的脉冲MIG 焊

Welding for bulletproof steel components of bank vehicle

防弹车板 构件 的 焊接

OVERALL PROCESS MANAGEMENT ON GAS SHIELD EQUIPMENT This paper introduces the details of the welding of the supporting components with the CO 2 gas shield welding and the compares it with other welding methods .

详细介绍了采用CO2 自动 焊 焊接 汽车支承 组件的工艺方法，论证了3个方案，确定采用双层焊工艺方案，并与其他焊接方法进行了对比。

Electronic Hanliao ; Electronic help of welding materials production ; Research and development of new electronic materials ; Tin welding materials ; Electronic components ; Electronic marketing tools .

电子焊料；电子助焊材料生产；新型电子材料研制开发； 锡焊材料；电子 元器件；电子工具销售。

This paper gives a brief introduction to the evaluation of the welding and composite joint welding technology and quality control of the trubine stay ring spiral-case which can be used for reference in welding similar high strength steel components for other large hydropower stations .

本文简要介绍水轮机座环蜗壳组合缝的焊接工艺、焊接质量控制及组合缝焊接前所进行的焊接工艺评定，可为其它大型电站类似高强钢 部件 的 焊接提供借鉴。

A Method for Building a CAPP Integrated System of Welding Components Based on Agent and Feature Technology

融合智能体和特征技术的 焊接 结构 件CAPP集成系统研究

The Study on Processing Welding Quality of the Electronic Components

提高电子 元件 焊接质量的研究

Speed of welding distance between nozzle and welding components etc.

焊接速度、喷嘴与 焊 件之间的距离等。

Preparation of process flow diagram reasonably determine the welding assembly sequence of components .

编制工艺流程图，合理确定 零 组件 焊接装配顺序。

Basic knowledge in welding and associate components .

基本 焊接与冲压/伸 模具的相关 部件知识。

There is no vaporization both of Ti and Al during the low-power welding process the components of the surface and the center of weld pool are the same .

电子探针结果表明，在低功率 焊接过程中，由于能量密度较低，因此在焊接过程中Ti和Al基本没有蒸发，基底和焊缝中心的 成分基本相同。

For the manufacturing process of motherboard and the characteristics of failure mode analysis we put forward that bad components and unhealthy welding of components are the two major factors of influencing the indicator of MTBF .

针对主板制造工艺过程的特点和故障现象的原理分析，提出了主板元器件不良和 元器件 焊接不良为影响MTBF指标的两大原因。

Hardware test is to guarantee its quality . Observe the Welding of components . Through the test program initialize the hardware to detect its quality .

硬件测试是质量测试，观察 元器件 焊接的情况，通过测试程序初始化硬件来检测其质量。

During the process of shipbuilding deformation of plentiful welding components makes against precision control of ship construction which affects the quality of ship construction .

在船体建造过程中，大量 焊接 构件的变形不利于船体制造精度的控制，从而影响到船舶建造的质量。

Automatic welding of the auto supporting components with the CO_2gas shield welding

汽车支承 组件的CO2自动 焊接

The electric spark build-up welding technology features less heat input and negligible residual stress etc. which is non-replaceable in the welding of special key components .

电火花堆焊工艺具有热输入量小、残余应力可忽略不计等显著特点，在特殊关键 部件 焊接中有不可替代性。

The flow velocity of the micro pump was tested . The liquid flowed calmly without leak and the ultrasonic welding method for polymer micro components proposed in this paper was validated .

对微泵进行流速测试实验，水流运行平稳无泄漏，这也验证了本文研究的聚合物微 器件超声波 精密 联接方法的有效性。

Residual stress occurs in the processes of manufacture and operation in metals especially in the processes of fabrication and heat treatment of welding components .

金属材料在制造和使用过程中会产生残余应力，在 焊接 构件的制造和热处理过程中尤为明显。

Biaxial stress of ferromagnetic materials and residual stress of welding components have been measured by using the relation between Barkhausen effeet based on the law of approach to saturation magnetization and internal stress .

利用该技术，以近饱和磁化产生的巴克豪森效应与应力的关系，测量了铁磁构件的二轴应力和 焊接 构件的残余应力。

Application circuit design software design weft signal processing circuit schematics PCB layout was designed and welding the components in the system board .

应用电路设计软件设计探纬器信号处理电路原理图，绘制PCB版图制板并 焊接 元器件。

Stress intensity factor K crack opening displacement ( COD ) and J-integral Criterions are used for assembled vats pressure vessels welding structures and rotation components ;

对于组合汽缸、压力容器、 焊接结构及大型旋转 构件，我们采用应力强度因子K，裂纹张开位移（COD）和J积分理论用于分析和计算；