triac

n.<美>三端双向可控硅开关元件

  • The contact and the gas valve are controlled by phototriac and triac .

    用光耦和 双向 控制接触器和电磁阀。

  • Thyristor bidirectional triode-type ; triac ; gated switch .

    双向三极型可控硅、三端 双向 可控硅开关元件、选通开关。

  • This paper presents a method of converting running and starting capacitor by a triac circuit .

    提出一种运用 双向 电路 改变 单相电容 电机启动与运行电容的方法。

  • The paper puts forward the PSPICE model of continuously adjustable inductor controlled by TRIAC simulates continuously adjustable inductor controlled by TRIAC using the method of PSPICE multiple transient analysis and studies current aberrance and regulation range of adjustable inductor .

    本文建立了 双向 可控 控可变电感的PSPICE模型,并利用多瞬态分析法对可控 控连续可变电感进行 PSPICE仿真,以研究可变电感的电流畸变和调节范围问题。

  • PSPICE Simulation Analysis of Continuously Adjustable Inductor Controlled by TRIAC

    双向 可控 控连续可变电感的PSPICE仿真研究

  • Applying constant power controller that is consisted of Triac controlled by the singlechip to heat the diffusion pump ensures that the pump can be operated in optimum heating power in long term .

    用单片机控制 双向 可控 的恒功率控制 用于控制扩散泵加热,保证了扩散泵在最佳加热功率条件下长时间稳定工作。

  • Performance of a Single-phase Induction Motor with AC Capacitor Switched by Triac

    单相电容电机采用 双向 开关电容的运行 研究

  • Studies on characteristics of a triac irradiated by 12 MeV electron beam

    12MeV电子束辐照 改善 双向 特性 参数的研究

  • Triac AC electronic switch with PLC

    具有PLC控制的 交流 电力电子开关

  • Quantitative Relationship and Calculation of Triac Parameters

    双向 参数的定量关系及计算

  • Control electric box or circuit board with contactor relay or triac that switches to the compressor .

    要切换到压缩机,可以通过电流接触器开关,继电器或者 双向 可控 来控制电流盒或者电路板。

  • In order to ensure working steadiness of the triac for a long time an annealing time should be prolonged for 2 to 4 hours at 200 ℃ after irradiation .

    为了保证 器件能够长期稳定工作,辐照后在200℃下进行 2&4h退火。

  • This AC power supply effectively solves the problem of triac circulating current while commutating . It makes AC voltage stabilization able to be realized when voltage is fluctuated and load is varied . The precision of AC output is ± 1 % .

    这种稳压电源有效地解决了 双向 的换向环流问题,可以在电网电压波动和负载轻重变化时实现稳压,其稳压精度为±1%

  • CHCO-01 series can through TRIAC dimmer technology to adjust the lamps'light and shade degree .

    稳定性。CHCO-01系列可透过 TRIAC调光技术,来调整灯具的明暗程度。

  • This paper introduces a method to control directly TRIAC miller with PS / 2 and communicating between them .

    介绍利用PS/2 计算机直接控制 数控铣床 TRIAC 运行和它们之间通讯的方法。

  • This paper investigates the transient behavior of turning off triac control of AC inductive loads with the computer simulates and presentes the curves of off-state voltage under different of circuit parameter conditions .

    双向 控制感性负载的关断过程作暂态仿真研究,并给出不同参数条件下关断电压暂态曲线图。

  • Technics of the Triac Controlling Capacitor ′ s Throw in / Cut off and Buffer Design

    开关控制电容器投切技术及缓冲器设计

  • Control of the Conduction Angle in a Triac

    可控 导通角的 数值控制

  • A Simple Triac AC Regulator Triggered at Zero Point

    一种简单的零触 发晶 交流调压 电路

  • Analysis of On State Voltage Characteristics for TRIAC

    双向 通态电压特性 曲线分析

  • Circuit consists of four silicon micro controller triac output control signals to the motor or solenoid valve switching operation AC power from the role of SCR switch circuit .

    可控硅电路主要由四 双向 可控硅组成, 用于将单片机输出的控制信号转换为电机或电磁阀的通断动作, 双向可控硅在该电路中起交流电源的开关作用。

  • A study of transient state on triac off-state voltage and optimization of parameters of snubber circuit for 3-phase induction motors switching application

    基于交流电机负载 双向 关断电压暂态研究及缓冲电路参数优化

  • The new typed triac of higher critical value of di / dt including the logic triac and the no-buffer triac ect . can not only improve the security of circuit but also reduce the cost of design .

    di/dt临界值大大提高的逻辑可控硅、无缓冲器可控硅等新型可控硅不但能提高电路的可靠性,还可以降低成本。

  • Analysis of triac switch parameter and application of new-typed triac

    可控断参数分析及新型可控硅的应用

  • Using PID control law and triac zero-crossing trigger way to adjust heating power of heating block zero-crossing pulse generator circuit and thyristor trigger circuit is designed .

    采用PID控制规律和 可控 过零触发方式调节加热板加热功率,设计了过零脉冲产生电路和可控硅触发电路。