welded structure

焊接结构

Examples

  • This article introduces foe characteristic and advantage of inner hole welded structure and its designing fabricating and running in a chemical fertilizer plant .

    本文介绍了“内孔 焊” 结构的特点、优点以及该 结构在我国某化肥厂装置中的设计、制造和运行。

  • Hot spot stress method used for evaluating fatigue strength of welded structure has obtained more and more application the FEM is vital in this method .

    用热点应力方法评定 焊接 结构的疲劳强度获得了越来越广泛的应用。在热点应力方法中，有限元分析是至关重要的。

  • Contrasted with contact reactive brazing the growth speed of welded structure is easily controlled .

    与接触反应钎焊相比， 焊缝 组织生长速度更易控制。

  • Nowadays aluminum alloy welded structure has been more widely used in the equipment manufacturing sector ; the fatigue analysis of Aluminum alloy welded joints is one of the important basic content of welded structure fatigue design .

    目前，铝合金 焊接 结构在整个装备制造业中被广泛应用，对铝合金焊接接头的疲劳分析已成为研究焊接结构疲劳设计的重要基础内容之一。

  • Effect of Welding Angle on Fatigue Performance of Welded Structure

    焊接角度对 焊接 结构疲劳性能的影响

  • The safety of rolling stock is highly affected by fatigue problem of welded structure of wagon body .

    货车车体 焊接 结构的疲劳问题严重影响了车辆的安全运行，疲劳断裂一旦发生，将产生非常严重的后果。

  • For the features of structural component of port cranes and the crane 's working environment and loading cases this paper analyzes the importance of controlling welding stress in welded structure .

    针对港口起重机主要部件的结构特点、工作环境和受载情况，分析控制 焊接 结构件焊接应力的重要性；

  • Failure of Stainless Steel Welded Structure and Its Precaution

    不锈钢 焊接 结构的失效与防治

  • Integrative Study of Fatigue Design and Welding Technology of Vehicle Welded Structure Based on Standards

    基于标准的车辆 焊接 结构抗疲劳设计与焊接工艺一体化设计

  • Head cover is of a welded structure of the Q235 steel plate with sufficient strength .

    顶盖为Q235钢板 焊接 结构，具有足够的刚强度。

  • The hull structure is a typical welded structure . The welding is a extremely process of the high temperature the dynamic state and the instantaneous state . and also produce the welding stress and deformation .

    船体结构属于一种典型的 焊接 结构，而焊接则是个极其复杂的高温、动态、瞬时过程，船体结构在焊接过程中不可避免地会产生焊接应力和变形。

  • The Relationship Between the Secondary Deformation of Welded Structure and Welding Deformation

    焊接 结构二次变形与焊接变形的关系

  • Secondly on the basis of introducing the fatigue strength of welding joint the main factors causing welded structure fatigue are analyzed and the methods for improving contained structure 's fatigue strength are introduced .

    其次，在介绍焊接接头疲劳强度的基础上，着重分析了影响 焊接 结构疲劳性能的主要因素，并简要介绍了提高结构疲劳强度的一些措施。

  • The total fatigue life for welded structure is the sum .

    二者寿命之和为 焊接 结构的总疲劳寿命。

  • All steel welded structure vibrating treatment of ageing for removal of internal stress with good rigidity and stability .

    全钢板 焊接 结构，综合处理（振动时效、热处理）消除内应力，有很好的刚性与稳定性。

  • Renovate the Welded Structure and Welding Technique of the Hydraulic Oil Tank to Improve the Cleanliness of the Oil Tank

    改进装载机液压油箱 焊接 结构和焊接工艺提高油箱清洁度

  • In this paper the hot spot stress evaluation method is studied for evaluating the fatigue strength of welded structure .

    本文研究了 焊接 结构疲劳强度的热点应力评估方法。

  • Research on Fatigue Life for Welded Structure of Mechanical Equipment

    机械设备 焊接 结构的疲劳寿命研究

  • It is demanding to fabricate crane bridge as large welded structure so the upgrade to change its span is very challenging .

    起重机桥架作为大型 焊接 结构件，制造要求高，其改制具有典型意义。

  • This Paper dissected the welding residual stress for three typical types of welded structure .

    本文解剖了三种典型 钢 结构的焊接残余应力，并采用目前较为先进的方法进行了 焊后处理，均达到了良好的效果。

  • Technology analysis on design for welded structure

    焊接 结构设计的工艺性分析

  • Low alloy high strength steel has been widely used in the welded structure because of its excellent performance and remarkable economic benefits .

    低合金高强度钢由于性能优异和经济效益显著，在 焊接 结构中得到越来越广泛的应用。

  • PFM analysis of influencing factors on fracture of welded structure with surface crack and the calculation of failure probability

    含表面裂纹 焊接 结构断裂影响因素的PFM分析与失效概率计算

  • So it is the new method of researching welded structure fatigue damage process .

    因此，它是一种研究 焊接 结构疲劳损伤过程的新途径。

  • Predicting Fatigue Life of Bogie Welded Structure Based on ANSYS Secondary Development and BS Standard

    基于ANSYS二次开发及BS标准的转向架 焊接 结构疲劳寿命预测

  • Corrosion-resistance aluminum as welded structure aluminum alloy is used in industry manufacture widely .

    防锈铝合金是用于 焊接 铝 结构 件的主要材料，在 焊接生产中常常遇到一些困难。

  • CAPM system of assembly & welding for welded structure of construction machinery

    工程机械 焊接 结构件装焊工艺流程及数据管理系统

  • The cutterhead of shield machine consisting of hundreds of welding seams belongs to large welded structure .

    盾构机刀盘属于大型 焊接 结构，主要焊缝数量可达上百处。