turbine disc

美[ˈtɚbɪn dɪsk]英[ˈtə:bin disk]

涡轮盘

Examples

  • Fracture analysis for turbine disc

    涡轮 盘的破裂分析

  • Stress of armor plate of the spiral case of large-scale turbine units Disc wheels for trucks & Dimensional characteristics of attachment on hub

    大型 水轮机组蜗壳钢板应力 监测分析 GB/T4095-1995载货汽车辐板式车轮在轮毂上的安装尺寸

  • Prediction of Low Cycle Fatigue Life for Turbine Disc by Small Sample & Webayes Method

    某 涡 轮盘小子样低周疲劳寿命评估计算&威伯斯先验评估法

  • A research on cracked failures of fir-tree serration in aeroengine turbine disc

    航空发动机 涡轮 盘榫齿裂纹故障研究

  • Turbine disc Missile Analysis of nuclear power station

    核电站 汽轮机 转子飞 裂分析

  • An engineering evaluation system of turbine disc cooling configuration

    旋转 盘腔冷却问题的工程评价

  • A nonlinear Continuum Damage Mechanics model was employed to analyze the creep life and damage of a gas turbine disc of a engine under typical flight then the results were compared with those from present linear damage cumulating theory .

    采用非线性连续损伤力学模型对某发动机 涡轮 轮盘在典型任务工况下的蠕变损伤和寿命进行分析，并同当前普遍使用的累积损伤理论进行比较，指出了累积损伤理论存在的问题。

  • For the design of a particular model of turbine rotor disc the MDO system for turbine disk and blade is built .

    针对某型号发动机 涡轮转子 盘片结构，设计开发了涡轮盘片多学科设计优化系统；

  • Fatigue Reliability Optimization of a Turbine Disc Based on Ant Colony Algorithm

    基于蚁群算法的 轮盘疲劳可靠性优化方法研究

  • A turbine disc was also successfully calculated with the design optimization method . Thus the problem of dimension conversion was solved .

    同时将其应用于某 涡轮 盘 的 冷、热态尺寸换算，从而成功地解决了 涡轮 典型 部件 冷、热态尺寸换算问题。

  • The Calculation of the Inner Three-dimensional Flow Field of a Centrifugal Turbine Disc and Its Engineering Applications

    离心 叶轮内部三元流场计算在实际工程中的应用

  • Structure analysis and life evaluation of the pin holes in a turbine disc of a type of aero-engine

    某型发动机 涡轮 盘销钉孔结构分析与寿命评估

  • An Analysis of the Vibration Characteristics of a Gas Turbine Bladed Disc

    燃气 轮机叶片 轮盘振动特性分析

  • In practice the turbine disc and the nozzles are fitted into a casing .

    实际上， 涡轮 圆盘和喷嘴是装在机壳里的。

  • Crack detection of turbine disc mortise of aero-engine by nondestructive testing

    发动机 涡轮 盘榫齿裂纹的探测

  • Reliability Design of Steam Turbine Disc

    汽轮机 叶轮的可靠性设计

  • The abrasion experiments and mechanical tests of 4 kinds of steels treated with heat are conducted on hydraulic turbine simulation disc equipment .

    对经多种热处理工艺处理的四种钢材，在 水轮 机模拟 圆盘仪上进行了磨蚀试验及力学性能测试。

  • This paper describes the method of reliability design for steam turbine disc . The method includes the analysis of reliability design of the static strength the vibration and the thermal fatigue on steam turbine discs . Some examples of the reliability design for steam turbine discs are given .

    本文介绍了 汽轮机 叶轮的可靠性设计方法，包括叶轮静强度、轮系振动和叶轮热疲劳的可靠性设计分析方法，并给出了汽轮机叶轮可靠性设计的实例。

  • Calculating the Temperature Field of a Gas Turbine Disc with Finite Element Method

    有限元法计算燃气 轮机 叶轮温度场的研究

  • Elastic - plastic Analysis Oil the Turbine Wheel Disc of the Supercharger

    增压器 涡轮 盘的弹塑性分析

  • Cracks Analysis of Sealing Labyrinth on High-pressure Turbine Disc ⅱ in an Aero-engine

    某发动机高压Ⅱ 级 涡 轮盘封严篦齿裂纹分析

  • Applications of Spray Forming Superalloys for Turbine Disc

    喷射成形技术在 涡轮 盘高温合金中的应用

  • By way of the three-dimensional stress analysis of EC-301 closed type centrifugal turbine disc integral structure the authors have come up with a novel method of integral structure stress analysis for a rotating turbine disc by using general finite element analysis procedures and temperture-treated interference fit .

    通过对闭式离心 叶轮 EC&301的整体结构三维应力分析.提出了一种用温度处理过盈配合.用通用有限元分析程序对旋转叶轮进行整体结构应力分析的新方法。

  • Effects of Seed Diameter Length of Friction and Gear Gap on Hulling Efficiency CRACK DETECTION OF TURBINE DISC MORTISE OF AERO-ENGINE BY NONDESTRUCTIVE TESTING

    籽粒粒径、碾搓行程和齿盘间隙与破壳效果相关性的研究发动机 涡轮 盘榫齿裂纹的探测

  • Analysis of a Turbine Disc Damage Caused by Forcign Objects

    涡轮 盘外物损伤事故分析

  • Precise FEA of tenon and mortise joint in turbocharger crack detection of turbine disc mortise of aero - engine by nondestructive testing

    增压器涡轮叶片和轮盘榫齿组装结构的精细有限元分析发动机 涡轮 盘榫齿裂纹的探测

  • In this paper the fracture accident at the rim of turbine disc for an industrial gas turbine is calculated and analyzed .

    某烟气轮机 涡轮 盘发生了 盘缘断裂掉块事故， 某 航空 发动机Ⅰ级涡轮 盘也大量发生槽底裂纹的故障。

  • Analysis of cracks on serration of turbine disc

    高压 涡轮 盘榫齿裂纹分析

  • Analysis of turbine disc response in thermal-mechanical loads

    航空 发动机 涡轮 盘热&机械载荷耦合响应分析研究