The results showed that super saturation solid station solution of W and C atoms was formed in tungsten plus carbon dual implanted steel .

实验结果表明， 钨和碳双注入H13 钢可在注入层中形成超饱和的钨和碳原子浓度。

Continuous Measuring of Chromium and Tungsten in High-speed Steel

高速 工具 钢中铬、 钨的连测

Tungsten Plating Technology on Steel Material

钢铁材料表面镀 钨工艺研究

Photometric Determination of Micro Amounts of Tungsten in Steel with Thiocyanate-Diphenhydramine Hydrochloride

盐酸苯海拉明&硫氰酸盐光度法测定 钢中微量 钨

Numerical simulation of pre-twisted tungsten projectile penetrating steel target

预扭 钨弹侵彻厚 钢靶的三维数值模拟

Most of the switch tubes used presently work in the gas spark region ( the right branch of Paschen curve ) and are made of graphite and mental such as tungsten molybdenum stainless steel and mercury .

目前实际应用的开关管多数工作在火花放电区域（巴邢曲线的右支），使用的电极材料一般为 钨、钼、 不锈钢、水银、石墨等。

A Technical Study of Ways of Adding Ferroalloy for Low Tungsten Alloy Steel and Molybdenum Alloy Steel Smelted by Electric Arc Furnace

电弧炉冶炼低 钨、钼合 金钢合金加入工艺探讨

Steel containing 10-15 % molybdenum ; properties are similar to tungsten steel .

含%钼的钢，性能类似 钨钢。

Low Tungsten Quick-cutting Tool Steel Used in Stamping Rod

新型低 钨高速工具 钢在冲棒中的应用

According to analyses and compare abrasion resistance technology of mechanical part and component introduces utilizing high-energy ion technology to inject and permeate carbide tungsten into the surface of steel body in order to form carbide tungsten-steel abrasion resistant material .

通过对各种零部件表面防磨工程技术的比较分析，介绍利用高能离子技术，在 钢基体表面注渗进碳化 钨，形成碳化 钨&钢耐磨材料。

Determination of Microamount Tin in Tungsten Steel and Molybdenum Steel by Hydride Generation Nondispersive Atomic Fluorescence Spectrophotometry Using Radio Frequency Electrodeless Discharge Lamp

氢化物&射频无极放电灯无色散原子荧光光谱法测定 钨钢和钼钢中微量锡

And processing all kinds of metal tungsten steel tools ;

以及加工各种金属 钨钢车刀；

Rapid spectrophotometric determination of tungsten in alloy steel with stannous chloride reduction - ammonium thiocyanate

氯化亚锡还原-硫氰酸铵快速光度法测定合金 钢 中 的 钨

The method is sensitive selective convenient rapid and satisfied with the determination of micro amounts of tungsten in alloying steel without separation .

该体系选择性好，灵敏度高，方法简便，已用于水相直接光度法测定合金 钢中的微量 钨，结果满意。

To introduce utilizing high-energy ion technology to inject and permeate tungsten carbide into the surface of steel body in order to form tungsten carbide steel abrasion resistant material .

介绍利用高能离子技术在钢基体表面注渗进碳化 钨，形成碳化 钨& 钢耐磨材料。

Oxidizability of slag has considerable effect on content of tungsten in molten steel so measures such as low oxidizability of slag and low basicity of slag ( < 1.5 ) should be taken for preventing tungsten in molten steel oxidizing .

炉渣氧化性对 钢液 中钨含量影响较大，为保证钨不受氧化，应保证炉渣氧化性很低，且将炉渣碱度降低到1.50以下。

The center wire is usually of tungsten or stainless steel and is about 0.1 mm in diameter .

中心丝通常是 钨丝或 不锈钢丝，直径约为0.1毫米。

A computational study of tungsten spheres impacting steel targets

钨球打 钢靶数值仿真研究

The methods to produce tungsten coating on refractory steel from Na_2WO_4-ZnO-WO_3 molten salts are studied .

在耐热 钢 基体上用Na2WO4-ZnO-WO3体系熔盐镀 钨，比较了脉冲镀与直流镀对 钨镀层性能的影响。

Investigations have been made to analyze tungsten in steel ( analysis lines chosen : w 4008.76 and W 2397.11 ) with various are current slit width and electrode spacing .

我们研究了铜 中钨的分析（分析线为W.4008.76与 W.2397.11），用了不同的电弧电流、狭缝宽度和电极距。

Rapid spectrophotometric determination of tungsten in steel with tin dichloride reduction thiocyanate

二氯化锡还原-硫氰酸盐快速光度法测定 钢 中钨

Technology for Hard Chromium Electroplating of High Tungsten Stainless Steel

高 钨 不锈钢 合金电镀硬铬工艺

Failure Behavior of Tungsten Alloy Shells Normal Penetrating Steel Targets

垂直侵彻 钢靶过程 中钨合金壳体破坏机理研究

The technology for the hard chromium electroplating of high tungsten stainless steel was investigated .

为了在高 钨 不锈钢 基体上获得符合技术要求的电镀硬铬层，研制了一种特殊的镀铬新工艺。

In view of the shortcomings of usual roll used in bar slitting rolling the tungsten carbide roll and alloyed steel roll were applied .

针对在棒材切分轧制中使用普通轧辊存在的问题，采用了碳化 钨辊和 合金辊，并取得了较好的经济效益。

Normal penetration of tungsten alloy hollow projectiles into steel and concrete targets were performed .

进行了 钨合金空心弹体垂直侵彻 钢靶板和混凝土靶板的实验。

Simultaneous Determination of Molybdenum and Tungsten in Steel Sample by Factor Analysis-Absorption Spectrophotometry

因子分析-吸光光度法同时测定 钢样中的钼和 钨

Determination of Tungsten Content in Steel and Alloys by Perchloric Acid Oxidation-Photometric Method

钢铁及合金 中钨测定的高氯酸氧化法

Tungsten carbide particulates reinforced steel matrix composites were fabricated by electroslag melting and casting process by using scrap tungsten carbide steel-bonded cement by powder metallurgy as raw material .

采用电冶熔铸工艺将废弃的 WC钢结硬质合金制备成WC/ 钢复合材料，研究了复合材料中显微缺陷的形貌及形成机理。