vacuum chamber

[ˈvækjuəm ˈtʃembɚ][ˈvækjuəm ˈtʃeimbə]

真空室[箱,罩],压力室

  • The idea is with the help of vacuum pump to increase the pressure difference between material hopper and vacuum chamber hence the packing environment can be achieved .

    通过真空泵 减压,使真空 里面的 负压慢慢增大,在产品供应漏斗和 真空 之间产生压差,从而实现包装过程。

  • The vacuum chamber is divided into two parts by a panel for the pressure control .

    连铸 设备 真空 腔体由分隔板分成两部分, 复合 铸型通过隔板 相连,并可以实现 真空和气体压差的控制。

  • Secondly the design and fabrication of the vacuum chamber was introduced and the corresponding experimental system was set up .

    其次,介绍了 空腔的设计与制作,并搭建了相应的实验系统。

  • The result of numerical simulation indicates that a small circular flow occurs in RH vacuum chamber .

    模拟结果表明RH 真空 室内 流场中存在小环流现象。

  • The vacuum gauge the thermocouple and other element related to the vacuum chamber are also included .

    此外,还包括真空规管,热电偶及其它与 真空 相关的观测、控制元件的选用。

  • Structure design and heat transfer analysis of cryogenic vacuum chamber

    低温 真空 腔体结构设计及传热分析

  • An in situ residual gas analyzer ( RGA ) was used to monitor the residual gas composition in the vacuum chamber .

    利用残余气体分析仪在线监测了 真空 室内的残余气氛组成。

  • For physical vapor deposition processes such as evaporation and sputtering the active parts of the subsystems are located within a vacuum chamber .

    在物理气相沉积过程中,比如蒸发或者溅镀等工序都可视为在 真空 室内 发生

  • Design and optimization of vacuum chamber for leak detection of ITER conductor

    ITER导体检漏 真空 的设计与优化

  • The primary advantage of plasma as opposed to the ion source approach is its ability to fill in the vacuum chamber and the couple with evaporant .

    相对于离子源,等离子体的最主要优点是等离子体可以填充 真空 ,耦合蒸发剂。

  • We found that three factors such as the water content of the sample its geometry arid the lowest pressure of the vacuum chamber strongly affect the final temperature of self-frozen materials .

    结果发现不同物料要达到抽真空白冻结的目的,首先物料自由水的含量需大于一定值,其次物料尺寸需适当,且自冻结的最终温度取决于 真空 的极限压力。

  • Most of the measured toroidal current is the current passing through the thick vacuum chamber .

    此时所测到的环向电流中绝大部分是流经厚壁 真空 的电流。

  • The performance experiment of arcjet was made in vacuum chamber and argon was chosen as the propellant .

    采用氩为推进剂,在 真空 中进行了发动机的性能实验。

  • The cell array system makes up of the cellular pipe the vacuum chamber and the micro vacuum pump .

    设计了细胞排列的细胞流道、 真空 ,选择了合适的细胞流动真空泵,实现了无重合信号细胞流动排队方法。

  • In this paper the experimental results of laser multiphoton ionization of background gases ( mostly oil-vapor ) in the vacuum chamber for laser produced plasma study are presented by using high power laser irradiation .

    本文报道了在高功率密度激光辐照下,激光等离子体研究用的 真空 中背景气体(主要是真空系统中的油蒸气)的多光子电离的实验研究结果。

  • Finite element analysis in the design of large vacuum chamber

    大型 真空 容器 结构设计中的有限元分析与应用

  • Solutions on jam for vacuum chamber of vacuum extruder

    也谈真空挤出机 真空 堵塞的解决途径

  • Surface pretreatment by film coating is one of the main methods to improve the characters of vacuum chamber material .

    对加速器 真空 室内壁进行镀膜处理是改善 真空 材料性能的主要方法之一。

  • The indoor coating mechanism of vacuum chamber provide the vacuum electrostatic spraying with the necessary hardware . Finally discussing three movement processes through the electrostatic spraying and their influencing factors .

    真空喷涂 室内所设计的喷涂机构为真空静电喷涂提供了必要的硬件准备。最后,讨论了静电喷涂工艺的三个运动过程和影响因素。

  • There are water cooling target chuck and back flanges on the top of the vacuum chamber .

    真空 顶部预留了法兰口并配有冷却靶台。

  • Design and stress analysis of supporting structure of HT-7U discharging vacuum chamber

    HT-7U放电 真空 支撑结构的设计和应力分析

  • Ultimately detailed analyses were presented about the design of the key part of cryogenic vacuum chamber & the optical window and trapezia supports .

    文中还对 真空低温 的关键部件光学窗口和梯形支撑的设计进行了详细分析。

  • In order to do researches on vacuum arcs in short-gap a demountable vacuum chamber is necessary .

    为了研究短间隙真空电弧,本工作首先设计建立了一个可拆式 真空灭弧

  • The OUSLAN spurting film productive technology is in progress in a very big vacuum chamber very low ina ctive gas of pressure in the environment and under electric energy effect .

    溅射膜生产工艺在一个很大的 真空 、压力很低的惰性气体环境中及电能作用下进行。

  • Change of the Gas Temperature in the Course of Pumping and Charging in Vacuum Chamber

    抽气和充气过程中 真空 容器 气体温度的变化

  • The field emission measurements were carried out in a vacuum chamber with a 5.0 × 10 ~ 5Pa pressure and their field emission properties have also been studied .

    5.0x10~(-5)Pa的高 真空 下,对各种碳纳米管薄膜进行了场发射性能测试,并对它们进行了场发射性能的比较研究。

  • The helium mass spectrometer leak detecting technology for a large vacuum chamber with the complex construction is described . Some problems in operation are shown and analyzed .

    叙述了复杂结构的大型 真空 容器氦质谱检漏应用技术,分析了其中存在的问题。

  • Very importantly there is a vacuum chamber with high vacuum pumps and electronics to run the mass spectrometer .

    拥有真空泵和电子装置的 真空 质谱仪运行中重要组成部分。

  • With the calculation and measuring experiment methods the effect of vacuum chamber materials magnetic permeability on field distribution in a dipole magnet is discussed .

    通过计算机模拟计算与实验相结合,讨论了 真空 磁导率对二极磁铁磁场分布的影响。