The relation model of failure modes and characters of the unit under test ( UUT ) is created . The general adequacy criterion for the sample set is proposed according to the relation model .

建立了故障模式与被测单元（ UUT）特性之间的关系模型，根据关系模型建立了样本集的通用充分性准则。

The Switches play an important role in connecting unit under test ( UUT ) and signal supply / measurement in auto test system ( ATS ) .

在自动测试系统中，开关矩阵起到连接 被 测 组件与信号激励/测量仪器的重要作用。

The analog prompting signal is provided to UUT by its special waveform generator . The switch during different signals is completed with matrix switches and adapters .

专用信号发生器为 UUT提供模拟激励信号，矩阵开关和适配器完成不同信号间切换。

The switch subsystem is central to the entire ATS connecting the many test points to the measuring instruments routing signals and connecting power to the UUT .

开关系统是整个自动测试系统的核心，开关系统在自动测试系统中实现测点与测试仪器间的连接，测试信号的路由切换以及 被 测 单元与电源系统的连接。

Engineering Principle and Practice of the Design of the UUT Diagnosis Policy in System

系统 UUT诊断策略设计的工程化原则与实践

The host computer acquires the capacity data of battery and AC status from UUT through the network and then compared it with the control limits thus to control the output status of the power box .

主控机通过网络读取 测试 机 的 AC状态和电池电量与控制限值比较，进而控制电源箱的输出状态 达到 充 放电 测试的目的。

The eddy current sensor with a rectangular excitation coil is designed which can convert eddy current field in the surface of UUT to a uniform field . Defect characteristic can be identified by detecting the disturbance field which arises from defects .

设计矩形激励线圈的涡流传感器，将 被 检 对象表面的涡流场转变为匀强场，通过检测缺陷引起的扰动场，识别缺陷特征 参数。

An UUT-Oriented Automatic Test Information Model

一种 面向 UUT的自动测试信息模型

The technologies are applied on a ATE system software test the result has proved what discussed are important means to guarantee the safety of ATE system and UUT .

这些测试技术在某型 综合自动检测系统的软件测试中得到了应用，结果证明这些软件测试技术是保证 工程 研制 进度、保障测控系统 硬件及 被 测 对象安全的重要手段。

Three-dimensional solid model of the UUT style three-axis turntable is built using an engineering software Pro / ENGINEER Wildfire ( Pro / E ) .

利用工程软件PRO/Engineerwildfire对 UUT型三轴转台进行了三维实体造型设计；

DDE Technology and its Application in Development of UUT Test Program

DDE技术及其在 ATE 系统 测控软件开发中的应用

The linkage relationship of switch resource includes the mutual electronic linkage of input and output lines among system switch relationship and the linkage relationship for testing the resource and material UUT .

开关系统的连接关系是指 构成系统的开关 模块间的输入输出线的相互电气连接，及以测试资源和具体 UUT的连接关系。

In this method UUT fault examples are not needed in designing fault dictionary so it can be easily realized .

该方法中故障字典的设计可 直接 根据 UUT的工作 原理 和 测试点的 设置情况进行，不需要 大量的故障实例，是 工程中容易实现的 自动故障诊断方法。

Then this paper puts forward the method of gradual elimination method for UUT with several SRUs .

针对多SRU结构 UUT，提出逐级排除法故障诊断方法。

The UUT model was proposed based on the thought of integrating test and diagnosis .

提出了基于测试与诊断相结合思想的 UUT模型；

As one new eddy current nondestructive testing ( NDT ) technology multi-frequency eddy current testing ( MFECT ) has the merits of interference elimination in testing procedure and multi-parameter detection of unit under test ( UUT ) .

多频 涡流检测作为一种涡流无损检测新技术，具有实现检测过程干扰抑制和被检对象多参数检测的优点。

Based on the Standard Thermal Profile of a PCB the thermal fault on the board can be detected accordingly .

在建立PCB的标准热像（SIP）后，通过计算机快速自动地 比较 分析被测板（ UUT）热像和从存贮器中取得的该板的STP，从而检测出PCB上的热模式故障。

Finally taking one virtual equipment as the UUT we describe it standardly using this Test Description Language and give the test program applying the describing document .

最后，以某虚拟装备为 被 测 对象，利用该流程描述语言进行了标准化描述，并给出了应用该描述文档 开发的测试程序。

The comparison between the accuracy of the UUT and the estimated calibration uncertainty is known as a Test Uncertainty Ratio ( TUR ) .

被测设备的准确度 指标与评定的校准不确定度之比。