Based on previous experimental data a numerical simulation of the the velocity temperature and pressure distributions of the internal flow inside a vortex tube has been done for observing and analyzing the flow and heat transfer inside the vortex tube .

基于现有的实验数据对 涡流 管进行了数值模拟研究，得到其内部流场、温度、压力分布图，观察并分析了涡流管内部流动与换热情况。

By utilizing an apparatus for measuring axial temperature of vortex tube with the influence of inlet press and structure of vortex chamber on energy separation process considered experimental studies on axial temperature for different inlet press and vortex chamber structures were made .

利用 涡流 管部分轴线温度测量实验装置，考虑到进气压力和涡流室结构对 涡流 管能量分离过程的影响，针对不同进气压力和不同涡流室结构的 涡流 管部分轴线温度分布进行了实验研究。

Numerical simulation research on the performance of the vortex tube .

涡旋 管性能的数值模拟研究。

The effect of the inlet pressure on the performance of the vortex tube which was designed by the authors was investigated by experiment with air as medium .

采用自行设计的 涡流 管，并以空气作为工作介质，通过实验研究了在其它条件相同的情况下，不同进口压力对 涡流 管性能的影响。

The configuration of the nozzle has great influence on the performance target of vortex tube .

喷嘴结构对 涡流 管性能指标具有重大影响。

Then discuss the advanced technology of vortex tube 's application in the pressure-regulating system of natural gas and light hydrocarbon condensate recovery of natural gas industry .

同时结合实际应用领域，探讨 涡流 管技术在天然气输配调压系统以及天然气工业轻烃回收中的应用。

A minitype vortex tube to little power electronic component cooling is introduced .

提出了一种应用于小功率电子散热的小型 涡流 管，设计建立了 涡流 管性能试验装置系统。

Vortex tube is a new device for energy separation and has comprehensive applications .

涡流 管是一种新型的能量分离装置，有着广泛的应用前景。

The vortex tube is a simple device which can cause energy separation .

涡流 管是一种可以产生 冷热分离 效应 的 结构简单的装置，尽管其在 结构和操作上非常简单，但 管 内发生的能量交换过程却极其复杂。

Application of air heater of vortex tube in petrochemical engineering industry has been summarized recently .

对近几年来 光 管 扰 流子空气预热器在石化行业的应用情况进行了总结。

Study on Gas Separation Performance of Vortex Tube with Supersonic Inlet Nozzles

超音速喷嘴 涡流 管气体分离性能研究

An experimental research on the performance of a small flow vortex tube is introduced .

本文用实验方法研究了小流量 涡流 管 制冷的特性。

Author gets the results of temperature distribution and velocity distribution of the vortex tube and the industry cabinet by the method of simulation software ;

作者用仿真软件分别对 涡流 管和工业机柜进行仿真模拟，一定程度上得出了 涡流 管 内部和工业机柜 内部的温度场和速度场的分布；

The flux through the wall of the vortex tube is zero by its definition .

根据涡 管定义，穿过 涡 管管壁的 涡量为零。

The experimental device on the performance of vortex tube is designed and its cooling performance affected by inlet pressure p0 and cooling air ratio μ is investigated .

针对进气压力 p0、冷气流率μ对其冷却性能的影响进行了试验研究。

Application of Vortex Tube Heating Technique in Gas Industry

涡流 管加热技术在天然气工业中的应用

The methods of experiment and numerical simulation have been used to study the coupling characteristics between vortex tube and refrigerants in this thesis .

因此本文采用实验和数值模拟相结合的方法，对 涡流 管与制冷剂的耦合特性进行了研究。

The Study on Vortex Tube as a Heat Exchanger

涡流 管类比逆流换热器方法的研究

Large eddy simulation of three-dimensional flow field in axial-flow type vortex tube

半导体二极管、半导体整流器二极管、金属整流器。轴流式 涡流 管内三维流场的大涡模拟

Application Perspective of Vortex Tube Technology in Natural Gas Industry

涡流 管技术在天然气领域的应用前景

The influence of inlet pressure and gases on the performance of a small vortex tube is investigated in this paper .

实验中分别对入口压力和工质等因素对 涡流 管特性的影响进行研究。

In this paper a method of entropy has been used to investigate vortex tube throttle valve and expansion turbine .

本文利用熵法对 涡流 管、透平膨胀机及节流阀三种装置进行了研究。

The performance testing experimental setup for gaseous medium working in a vortex tube has been built .

搭建了气态工质在 涡流 管中性能测试的实验装置。

Vortex tubes of different length were developed and the effect of the length on the performance of vortex tube was investigated by experiment with air as medium .

研制了不同 热 端 管长度的涡流管，并以空气作为工作介质，通过实验研究了 热 端 管长度对 涡流 管 能量 分离性能的影响。

This paper present application of vortex tube as refrigerator in several different domain .

本文介绍 涡流 管制冷在各种不同领域内的应用。

Effect of the Pressure on the Performance of the Vortex Tube

压力对 涡流 管性能影响的实验研究

This paper mostly introduces a method for computing dust separation efficiency of the vortex tube in the engine air particle separator of helicopter .

本文介绍了直升机发动机进气防砂装置核心元件& 涡旋 管的砂尘分离效率计算方法。

The paper presents a kind of vortex tube part which has high efficiency to remove dust property .

本文提出了一种新型高效的湿式除尘元件& 涡流 管，并对其进行了实验研究，分析了 涡流 管除尘机理，并得到了实验验证。