Tearing strength by tongue method

单舌法 撕破 强力 试验法

Experimental results obtained on fabrics woven in accordance with a particular plan indicate that the weave has a very marked effect on both tearing strength and stiffness .

一大部分尚未被应用的组织对织物工程研究具有十分重要的价值。文中对18种不同组织试样的测试结果表明，织物组织对织物的 断裂 强度、刚度有显著影响。

Used for testing tearing strength of woven fabric light-weight nonwoven fabric and coated fabric .

用于各种机织物的 抗 撕裂 强力测定。

Loading rate has significant effects on tearing strength .

加载速率较 低时，其 撕裂 强度 较小；

When webs weight increases rupture strength tearing strength and bursting strength are increased .

随着纤网定量的增加，断裂强度， 撕破 强度和顶破强度增加。

Optimum applied conditions of DP finish QD-WR have been obtained by research of DP process . The applied performance was investigated by determination of wrinkle recovery angle DP grade tearing strength and whiteness of the fabric treated with 2D resin and QD-WR respectively .

通过对免烫整理剂QDWR整理加工条件的研究，确定了免烫整理剂QDWR的最佳应用条件，并对处理后织物折皱回复角、水洗后平整 度、 撕破 强力和白度等进行分析。

The tearing strength of bleached AS-AQ pulp is equivalent to bleached KP .

漂白ASAQ浆的 撕裂 强度与KP浆相当。

The effects of three principal fiber properties-length coarseness and strength-on the tearing strength of paper have been studied . The effects of beating and pressing on the tearing strength of paper also have been investigated .

本实验从纤维特性&纤维长度、粗度和纤维本身 强度方面研究了对纸页 撕裂性能的影响，也研究了打浆、压榨对纸页撕裂强度的影响。

The force in gram required to tear the paper eo a certain length gives the edge tearing strength .

撕到一定长度所需的力量，以克表示，就是它的纸边 撕裂 度。

Tearing Strength Improvement of Polyurethane Coated Fabrics

提高聚氨酯涂层织物 撕破 强力研究

The modulus tensile strength and tearing strength of rubber with acetone extracts are higher than before .

力学性能测试实验也表明了外加丙酮溶物NR、 IR的定伸应力、拉伸强度及其 撕裂 强度都高于空白 样。

This paper deals with the development of glass fiber reinforced thermoplastic polyurethane and its properties such as impact strength coefficient of linear thermal expansion and tearing strength .

本文阐述了玻璃纤维增强热可塑聚氨酯的发展情况，并对其冲击性能，线性热膨胀系数和 撕裂 强度等材料性能作了详细的介绍。

The nanocomposite was superior to the pure polymer in thermal stability tensile strength and right-angle tearing strength .

纳米复合材料的热稳定性、拉伸强度和直角 撕裂 强度均比纯聚乙烯醇有很大提高。

Influence factors of PVC coating agent on tearing strength of coated fabric by changing coating agent composition is studied in this paper .

通过对涂层剂组成的调整，研究影响聚氯乙烯涂层织物 撕裂 强度的因素。

However if the yarns are packed too tightly the fabric will have reduced tearing strength abrasion resistance and wrinkle recovery .

但是，如果纱线密度过大，织物的 撕裂 强度、耐磨强度及折皱恢复能力会降低。

Vinylon fabric treated with DMDHEU increased the crease recovery and lowered the tensile strength tearing strength elongation percentage and water imbibition .

经DMDHEU整理后，织物的折皱恢复性提高，断裂强度、 撕破 强度、延伸率和吸水性下降。

Moreover the influences of coating processing on tearing strength were studied as curing temperature and coating thickness increase the tearing strength of coated fabric decreases .

通过涂层工艺对织物 撕裂 强力的分析表明，随着焙烘温度和涂层厚度的增加，涂层织物的撕裂强力降低；

The tearing strength is increased with the improving of the fiber coarseness in a poorly bonded sheet .

在纤维结合较差的纸页中， 撕裂 强度随纤维粗度的增加而增加。

The results indicated the thickness basic weight and tearing strength index of paper had no change ;

结果表明，厚度、定量和 抗 张指数没有变化；

Study on the Relationship between Fiber Properties and Tearing Strength

纤维特性与 纸 页 撕裂 性能关系的研究

This paper talked about the effects of fiber length coarseness and strength on the properties of paper which include tensile strength tearing strength burst strength and formation .

讨论了纤维的长度、粗度和纤维的内在强度对纸页的抗张强度、 撕裂 度和耐破度以及 纸 页成形性能的影响。

Good tearing strength and tension resistance .

撕裂 强力及抗拉伸 强力好；

The tear properties and mechanisms of membrane materials under different standards were studied especially the influence of the crack length and direction on its tearing strength and strain under mono-axial centre slit tear test .

研究了不同标准下膜材的撕裂性能和机理，重点研究了中缝撕裂法中初始裂缝长度和方向对其 撕裂 性能的影响。

Mechanical Analysis of Tearing Strength of Fabrics

织物 撕破 强力力学性质的分析

The relationships between the concentration of cross linking reagent in polyurethane coat trapezoidal tearing strength and other mechanical properties of coated fabric have been studied .

探讨了聚氨酯涂层中交联剂浓度与涂层织物的梯形 撕裂 强力及其他机械性能之间的关系。