Based on the principle of the Zero-Pole assignment controller this thesis makes the research on designing the Electro-magnetic gear control system aimed at the controlled object-the Electro-magnetic gear transmission system and makes recognition of the parameters .

基于 零 极点配置自校正控制器原理，针对被控对象&电磁齿轮传动系统研究设计了电磁齿轮控制系统，并对其参数进行辨识。

Zero-Pole Method for Frequency Amplitude - phase Characteristic Calculation

频域计算的 零 极点法

By the conventional internal model control method for internal model control design to the intelligent development of internal model control method more typical of the conventional design methods such as two-step method zero-pole cancellation method predictive control law .

内模控制已由常规内模控制设计方法向智能内模控制方法发展，较典型的常规设计方法如两步法、 零 极点对消法、预测控制法等。

In this paper we design the IMC controller using zero-pole cancellation method and tune the feedforward filter parameter and the gain parameter K using fuzzy inference method .

本文采用 相消法设计内模控制器，同时在线模糊调节前馈滤波器的时间常数β和增益参数K。

Using Zero-pole Method to Research the Frequency Response of Resonance Circuit

基于 零 极点 分析法的谐振电路的频率响应研究

A Direct Zero-Pole Assignment Controller

一种直接 零 极点配置控制器

Accordingly with zero-pole matching method corresponding digital filters for dynamic compensation are designed and dynamic compensation method based on neural network is also studied and corresponding dynamic compensation networks are designed .

然后在此基础上，采用 零 极点匹配法设计了相应的动态补偿数字滤波器，并对基于神经网络的动态补偿方法进行了研究，设计了相应的神经网络动态补偿器。

Application of zero-pole match method in electrohydraulic position servo system

零 极点匹配法在电液位置伺服系统中的应用

The zero-pole point distribution and the dynamic performance and the transient response of the DD-1 and DK-1 seismograph systems

DD1和DK1地震仪系统的 零 极点分布、动态特性与暂态响应

The complex state signal flow graph is used for modeling the PWM conversion part . With the analysis of zero-pole graph of the current control inner loop a novel complex state current regulator is proposed .

利用复矢量信号流图对PWM变换环节进行建模，在对电流内环控制 系统 零 极点图分析的 基础上，提出了一种新颖的复矢量电流调节器。

Zero-pole Point Identification Based On Genetic Algorithm

遗传算法在 零 极点辩识中的应用

According to the character of MDSLS a new controller is developed which is based on ITAE combined with invariance theory and zero-pole placement .

提出了一种用于电动伺服加载系统的控制器设计新方法，该方法主要基于ITAE最优控制理论，并结合了不变性原理及 零 极点配置理论。

This paper analyzes key techniques of digital nuclear pulse processing . With MATLAB software main algorithms are simulated such as trapezoidal shaping digital baseline estimation digital pole-zero / zero-pole compensation poles and zeros identification .

文章分析了数字核脉冲处理关键技术，利用MATLAB完成了梯形成形、数字基线估计、数字极 零零极补偿、极零点识别等核心算法的模拟。

The other methods include : The conventional method of spectrogram parameters the zero-pole model and the fractal method the latter two were proposed by the present authors before .

这些方法包括：传统的声谱参数法及以前提出的 零 极点模型法及分形分析法。

The Zero-Pole Substructure Analysis of Linear Multivariable Systems

多变量系统 传递 函数 阵 零 极点的子结构 特征分析

The properties of a nonlinear transfer function are studied . The new ideas of nth-order . stability nth-order zero-pole point nth-order frequency response and nth-order sensitivity as well as a new theory and implementation on sensitivity of nonlinear circuits and systems are proposed .

本文研究了非线性传递函数的性质，提出了n阶稳定性、n阶 零 极点，n阶频率响应、n阶 零灵敏度等新概念和非线性系统灵敏度分析的新理论和方法。

Zero-pole analysis method for audio Doppler signal in medical ultrasound

医学超声中音频多普勒信号的 零 极点分析法

To solve the problem of excessively big parameter value in the conventional LQG / LTR controller a design method was proposed for non-fully recover LQG / LTR. The principle for reducing the controller parameter value was explained from the perspective of system 's zero-pole relationship .

为解决常规LQG/LTR控制器中存在的参数值过大问题，提出了非完全恢复的LQG/LTR设计方法，并从控制系统中 零 极点关系的角度，阐述了该设计方法降低控制器参数数值的机理。

Through analyzing influence of the location of zero-pole points on the dynamic characteristic the paper designs the dynamic compensation units by re-disposing zero-pole points .

并通过理论上分析 零 极点对系统动态特性的影响，研究了利用重新配置零极点来改善系统动态特性的方法。

A Systems zero-pole Correction based on state space method

基于状态空间方法的系统 零 极点校正

For avoiding the zero-pole cancellation between controller and target by solving the Riccati equation PS / T sensitivity design method is introduced .

首先，将 PS/T灵敏度设计方法引入控制器设计，解决了基于Riccati方程法在设计 过程 中 的 零 极点对消问题。

In view of the disadvantages of zero-pole matching dynamic compensation method the dynamic compensation method of tilting train measurement system based on non-linear neural network is put forward .

针对 零 极点匹配动态补偿方法的不足，提出基于非线性神经网络的摆式列车检测系统动态补偿方法。

Dynamic compensator for the accelerometers was set up to improve the navigation precision of non-gyro inertial measurement unit ( NGIMU ) by using the zero-pole assignment based on the proposed 9-accelerometer .

基于提出的一种无陀螺惯性测量组合（NGIMU）九加速度计配置方案，采用 零 极点配置的方法设计动态补偿器对加速度计进行动态补偿。

To resolve the PID control problem of unknown systems intelligent PID controller of zero-pole placement was designed according to PID control system theory and zero-pole placement theory .

为解决未知系统的PID控制问题，根据PID控制及零极点配置控制理论， 详细 讨论了 零 极点配置PID控制器、智能PID控制器的 构成 过程。