Analysis of sealed structure with double plate in wedge gate valve connected with embedded gear

嵌入式 齿形连接楔式 闸阀双闸板密封结构

The dynamic characteristic of rotary valve of hydraulic power steering gear was analysed and the non-dimensional equation of loading pressure loading flow was established .

对液压动力 转向器的转向控制 阀进行动力学分析，并且建立了负载压力、负载流量的无因次方程。

Modern Engine 's Shifty Valve Gear and Electromagnetic Valve Gear Mechanism

现代发动机可变 配 气 系统及电磁气门驱动机构

Residual oil can be drained via valve at the rear of gear reducer and oil drain valve in thrust bearing oil sump .

残油的排放可由 减速机尾部的 阀门和推力轴承油池的放油阀门来进行。

The cylinder head carries the valves valve springs and the rockers on the rocker shaft this part of the valve gear being worked by the push-rods .

气缸盖携带阀门，气门弹簧和在摇臂杆上的摇臂，这部分的 气门 传动机构通过推杆工作。

A revolving valve and type power steering gear is designed by combining power cylinder distributing valve steering gear into a compact high sensitive and reliable operating integrity so as to promote the technical performs of the motor vehicle steering system .

转阀式动力转向器将动力缸、分配 阀 和 转向 器 设计成结构紧凑、灵敏度高、工作可靠的一个整体，从而提高了汽车转向系的技术性能。

The study indicates that applying constrained damping to thin-walled components such as valve cover and timing gear cover and adopting compound structure can effectively suppress high frequency radiated noise of these components ;

研究中发现，对 气门罩盖和 齿轮室盖薄壁部件处施加约束阻尼，采用复合结构，可以有效抑制发声部件的高频段辐射噪声；

The new technology and new structure of model AJR engine applied in Santana 2000 car is introduced including light valve gear camshaft tappet friction pair timing transmission system lubricating system and cooling system .

对桑塔纳2000轿车用AJR发动机从以下几个方面：轻型 气门 机构、凸轮轴和挺杆摩擦副、正时传动系统、润滑系统和冷却系统的新技术、新结构作了概要分析。

Applied Research on the Electro Hydraulic Redundancy Digital Valve in Marine Hydraulic Steering Gear

电液余度数字 阀在船舶液压 舵机 系统中的应用研究

Flexible multi-body dynamics was applied to the dynamic computation of valve gear in internal combustion engines in this paper .

本文把最近发展的柔性多体系统动力学应用到内燃机 配 气 机构的动力计算之中，由此建立的 配 气 机构多体模型优于以往其它各动力模型。

Based on the analysis on the valve gear kinematic curves of a certain chrysler engine it is found that there is a discontinuity in the positive acceleration portion then a N th harmonic valve lift curve meeting the constraint conditions has been designed by optimization .

针对美国Chrysler发动机 气门运动曲线在最大正加速度段有突变这一问题，进行了分析。采用优化设计法设计了一条满足约束条件的N次谐波气门运动曲线。

Simulative study on the multi-bodied dynamics of valve gear of diesel engine

柴油机 配气 机构多体动力学的仿真研究

Direct valve gear Thus a normal loom has two shafts . The main shaft ( crankshaft or top shaft ) drives the lay mechanism and is geared to another shaft which operates at half of the speed of the crankshaft .

直接 式 气门 驱动 机构这样，普通织机应具备两根轴，主轴（曲拐轴或位于上部的轴）驱动筘座并通过齿轮驱动另一根轴。

The hydraulic power steering gear in a variety of power steering gear to occupy the leading position and as the hydraulic power steering gear of rotary valve of hydraulic power steering gear is more widely used .

目前液压助力转向器在各种助力转向器中占据主导地位，而作为液压助力转向器之一的转 阀式液压助力 转向 器更是应用广泛。

The Simulator Design of the Four-channel Electro-hydraulic Servo Actuator Applied Research on the Electro Hydraulic Redundancy Digital Valve in Marine Hydraulic Steering Gear

某型飞机电传操纵系统四余度电液舵机模拟器设计电液余度数字 阀在船舶液压 舵机 系统中的应用研究

Substantial construction working principle and practical maintenance method of revolving valve type power steering gear is presented in detail .

详细地介绍了转 问式动力 转向 器的具体结构、工作原理和具体维护方法。

Acoustic signal analysis is introduced to the fault detection of the valve gear train of locomotive diesel engine . The empirical mode decomposition ( EMD ) and Laplace wavelet were used to extract fault features .

本文将声信号分析引入机车柴油机 配 气 齿轮系检测与故障诊断，以经验模式分解和Laplace小波为工具，开展 齿轮 系故障特征提取方法研究。

Dynamic Analysis for Overhead Valve Gear of Diesel Engine by Means of FEM

柴油机 配 气 机构有限元动力分析

Analysis and Improvement in Valve Gear Mechanism of 95 Series Diesel Engine

95柴油机 配 气机构分析与改进

Study of Dynamic Characteristics of the Valve Gear of Internal Combustion Engine

内燃机 配 气 机构动力特性的研究

The Unified Optimization Model of Valve Gear Systems And Its Parametric Programming Methods

配 气系统的统一优化模型及其参数规划法

Engine noise source identification is essential for making noise reduction strategies . Predominant noise sources of engines are normally identified as some cover components such as oil pan valve cover and front gear cover etc.

发动机噪声源识别对于制定发动机降噪措施十分重要，而像油底壳、 气门罩、前 齿轮室盖等罩壳类零件通常是发动机的主要噪声源。

The Technological Experiment to Improve the Durability of Engine Valve Gear

提高发动机 配 气 系统寿命的试验

Eccentric and cam valve gear eccentric drive frequency deviator

偏心 轮 与 摇杆传动 装置

Indirect valve gear End play in drive pinion bearings .

间接式 气门驱动 机构驱动小齿轮轴承的端隙。

The Elastodynamic Analysis of the Valve Gear Mechanism of Internal Combustion Engine Type 390 on Its Working Arc of Cam Two-arc cam is one of the cam profiles used in high-speed diesel engine valve gears .

390内燃机 配气机构四圆弧凸轮弹性动力学分析双圆弧凸轮是高速柴油机配气机构中凸轮的一种。

Visual product virtual assembly and virtual work under VPD environment are realized through the virtual assembling examples of a plasticator and the light bus and virtual working simulation of a piston valve gear and a engine .

结合挤塑模和轻型客车的虚拟装配、活塞连杆 机构及发动机的运动过程，实现了基于真实动画感的 VPD环境下的产品虚拟装配及虚拟工作过程仿真。

Analysis and Inspection & Repair of the Valve Gear of Buick Car V6 Engine

别克V6发动机 配 气 机构的分析与检修

Mix programming technology and interface method are discussed between Matlab and VB and no gap integration of application system is implement which can be utilized in CAD / ACM project of the valve gear cam .

探讨了这两种语言的混合编程技术与接口方法，实现了应用系统的无缝集成，为进一步实现 内燃机 配气凸轮CAD／CAM一体化奠定了基础。

Test and Analysis of Dynamic Characteristics for Engine Valve Gear

发动机 配 气 机构动态特性测试和分析